SEAL-O-RING 1273284 - Caterpillar

Illustration 1 g03505417
Typical example
Table 1
Specification for 294-1536 Bucket Linkage Gp and 297-7352 Bucket Linkage Gp
Item Qty Part Specification Description
- Assemble the linkage on the machine by rotating the rod end of the bucket cylinder and by positioning the grease fitting away from the stick. All bores must be free of paint. Coat all the bores for pins with 5P-0960 Grease Cartridge.
1 2 294-1561 Bushing Bore before assembly is 120.30 0.02 mm (4.736 0.001 inch).
Installation depth is 9.65 0.80 mm (0.380 0.031 inch).
2 4 9X-4599 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
3 2 9X-4598 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
4 1 441-0039 Pin As Diameter is 119.85 0.04 mm (4.718 0.002 inch).
5 2 4I-6718 Bushing Bore before assembly is 110.300 0.020 mm (4.3425 0.0008 inch).
Installation depth is 9.50 0.80 mm (0.374 0.032 inch).
6 1 212-3088 Pin As Diameter is 109.85 0.04 mm (4.325 0.002 inch).
7 1 294-1545 Pin As Diameter is 89.85 0.04 mm (3.537 0.002 inch).
8 1 441-0038 Pin As Diameter is 119.85 0.04 mm (4.718 0.002 inch).