SEAL-O-RING 1295701 - Caterpillar

1295701 SEAL-O-RING Caterpillar parts D8R, D9R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1295701
129-5701
1295701

Weight: 0.01 pounds 0 kg.

Information:

CROSS SECTION DIAMETER 2.62 mm

DASH SIZE 147

ID 67.94 mm

MATERIAL Silicone (VMQ) Rubber - 70 Duro

OD 0 mm

Buy SEAL-O-RING 1295701 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

OSG USA 1295701 5/16-24 X 4" OAL 3 Flute H3 HSS Spiral Pointed Pulley Tap-Steam Oxide

$70.50

29 Apr 2020

-: -

OSG USA 1295701 5/16-24 X 4" OAL 3 Flute H3 HSS Spiral Pointed Pulley Tap-Steam Oxide
Plug style || Sold as each and Easy to use || Highly wefficient in performance

Show more prices Caterpillar parts

Number on catalog scheme: 6

Caterpillar 1295701 Parts scheme SEAL-O-RING

For full view, you need register

Compatible equipment models: 1295701:

TRACK-TYPE TRACTOR D8R D9R Caterpillar

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Drain the engine lubricating oil into a suitable container. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
If necessary, remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
Illustration 1 g01380914
Typical example
Illustration 2 g01380957
Disconnect the hoses from Connections (A) and hoses from Connections (B) on oil cooler body (2).
Loosen banjo bolt (1) from oil cooler body (2).
Remove oil cooler body (2) from adapter (3).
Remove O-ring seal (7) and O-ring seal (8) from oil cooler (2).
Remove banjo bolt (1) from the oil cooler body.
Remove sealing washer (6) from banjo bolt (1).
Illustration 3 g01380915
Sequence for loosening the engine oil cooler
Loosen bolts (4) in reverse numerical order to the sequence that is shown in Illustration 3. Remove bolts (4). Support adapter (3) as the bolts are removed. Note: Bolts (4) are different lengths. Note the correct position of the bolts. Note the position of any brackets that are secured by the bolts.
Remove adapter (3) from the cylinder block.
Remove joint (5) (not shown).