SEAL KIT- 1324993 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 242     -    
Open the left rear access door.
Illustration 1 g02301942
Turn battery disconnect switch (1) to the OFF position.
Illustration 2 g02301635
Remove bolts (2) and plate assembly (3) .
Illustration 3 g02301638
Disconnect harness assembly (5), ground strap (6), and cable assembly (4) .
Use two people in order to remove electric starting motor (7). The weight of electric starting motor (7) is approximately 35 kg (77 lb). Remove bolts (8) and electric starting motor (7) .Installation Procedure
Install electric starting motor (7) in the reverse order of removal.
Tighten ground strap (6) to a torque of 31 4 N m (23 3 lb ft).
Tighten cable assembly (4) to a torque of 31 4 N m (23 3 lb ft).
Apply Tooling (A) to the threads of bolts (2) .