SEAL KIT- 1328518 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     189-0408     Shackle As     2    
B     138-7575     Link Brackets     2    
C     -     Loctite 271     -    
Illustration 1 g02154208
Use two people in order to remove plate assembly (1). The weight of plate assembly (1) is approximately 24 kg (55 lb). Remove bolts (2) and plate assembly (1) .
Use two people in order to remove plate assembly (3). The weight of plate assembly (3) is approximately 26 kg (60 lb). Remove bolts (4) and plate assembly (3) .
Refer to the Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain" for the proper draining and filling procedures.
Illustration 2 g02154241
Remove cover (8). Use two people in order to remove cover assembly (7). The weight of cover assembly (7) is approximately 28 kg (62 lb). Remove bolts (9) and cover assembly (7) .
Remove handrail assemblies (5) and (6) .
Illustration 3 g02154291
Disconnect harness assemblies (10) and (12). Cut cable straps (11) and reposition the harness assemblies.
Illustration 4 g02154694
Illustration 5 g02154695
Disconnect hoses (14) and (16) .
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (13). The weight of an empty fuel tank (13) is approximately 256 kg (565 lb). Remove bolts (15) and fuel tank (13) .Installation Procedure
Install fuel tank (13) in the reverse order of removal.
Apply Tooling (C) to bolts (15). Tighten bolts (15) to a torque of 520 70 N m (385 52 lb ft).
Apply Tooling (C) to the threads of bolts (2) and (4) .