1361599 SEAL KIT- Caterpillar parts
Rating:
Alternative (cross code) number:
CA1361599
136-1599
1361599
CA1361599
136-1599
1361599
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
MURNELAP for Seal Kit 2339204 1361599 Fits 140M2AWD 140M3 140M3AWD 140MAWD 143H
MURNELAP For Seal Kit 2339204 1361599 Fits 140M2AWD 140M3 140M3AWD 140MAWD 143H || Seal kit 2339204 1361599 designed to fit various models including 140M2AWD, 140M3, and 143H for efficient maintenance and repair of hydraulic systems. || Compatible with 140M3AWD, 140MAWD, and other specified models, ensuring proper sealing and functionality of essential components. || Ensures consistent and dependable operation of your lawn mower. || Verify Fit: For optimal performance, please review the product's appearance in the photo and verify it against the specified dimensions to ensure a precise fit.
MURNELAP For Seal Kit 2339204 1361599 Fits 140M2AWD 140M3 140M3AWD 140MAWD 143H || Seal kit 2339204 1361599 designed to fit various models including 140M2AWD, 140M3, and 143H for efficient maintenance and repair of hydraulic systems. || Compatible with 140M3AWD, 140MAWD, and other specified models, ensuring proper sealing and functionality of essential components. || Ensures consistent and dependable operation of your lawn mower. || Verify Fit: For optimal performance, please review the product's appearance in the photo and verify it against the specified dimensions to ensure a precise fit.
Replacement for fits Seal Kit 2339204 1361599 Fits CAT 140M2AWD 140M3 140M3AWD 140MAWD 143H
RFSHOPQO
RFSHOPQO
Seal Kit 2339204 1361599 Fits CAT 140M2AWD 140M3 140M3AWD 140MAWD 143H
Generic Package included: 1x Seal Kit 2339204 1361599 Fits CAT 140M2AWD 140M3 140M3AWD 140MAWD 143H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
Generic Package included: 1x Seal Kit 2339204 1361599 Fits CAT 140M2AWD 140M3 140M3AWD 140MAWD 143H as the picture . || High-Performance Efficiency: gineered for maximum efficiency, this product delivers exceptional performance without compromising on quality. It’s a versatile replacement suitable for various applications. || Identify the model: USE Ctrl + F to SEARCH your model number inside the Product Description. || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours || Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours
For full view, you need register
Information:
Use this procedure to troubleshoot the electrical system if a fault is suspected with the sensors. Use this procedure if any of the diagnostic codes in Table 1 are active or easily repeated.
Table 1
Diagnostic Codes Table for the DEF Tank Sensor
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
1761-3 3130-3 Aftertreatment 1 Diesel Exhaust Fluid Tank Level : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1761-4 3130-4 Aftertreatment 1 Diesel Exhaust Fluid Tank Level : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3031-3 3134-3 Aftertreatment 1 Diesel Exhaust Fluid Tank Temperature : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3031-4 3134-4 Aftertreatment 1 Diesel Exhaust Fluid Tank Temperature : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged. The 5 VDC signal for the Diesel Exhaust Fluid (DEF) tank level sensor is routed to terminal 1 of the tank header unit. The 5 VDC signal for the DEF tank temperature sensor is routed to terminal 3 of the tank header unit. The sensor return is shared and is routed to terminal 2 of the tank header unit. The ECM provides short circuit protection for the internal power supply. A short circuit to the battery will not damage the internal power supply.Note: The tank header unit houses the DEF tank temperature and the DEF tank level sensors. The sensors are not serviceable individually.
Illustration 1 g03811036
Schematic diagram for the DEF tank header
Illustration 2 g03811042
(1) DEF level signal
(2) Sensor return
(3) DEF temperature signal Complete the procedure in the order in which the steps are listed.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Diagnostic Codes
A. Establish communication between the electronic service tool and the DEF Control Unit (DCU) . Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Turn the keyswitch to the ON position.
C. Check for "-3" or " -4" active or logged codes.
Diagnostic code
Result: A -3 diagnostic code is active.
Proceed to Test Step 2.
Result: A -4 diagnostic code is active.
Proceed to Test Step 3.
2. Create a Short at the Sensor Connector
A. Verify that the harness connector is free of debris, free of corrosion and securely connected.
B. Install a jumper wire between the appropriate signal and return wire at the sensor connector in order to create a short. Refer to Illustration 2.
C. Turn the keyswitch to the ON position.
D. Monitor the diagnostic codes on the electronic service tool. Check for an active -4 diagnostic code for the suspect sensor.
E. Turn the keyswitch to the OFF position.
Short created
Result: A -4 diagnostic code became active after creating the short at the sensor connector. The wiring is OK.
Repair: Replace the DEF tank header assembly. Refer to the Disassembly and Assembly manual.
Verify that the fault is resolved by cycling the keyswitch to the OFF position for 2 minutes. Turn to the keyswitch to the ON position and check
Table 1
Diagnostic Codes Table for the DEF Tank Sensor
J1939 Code CDL Code Code Description
(code descriptions may vary) Comments
1761-3 3130-3 Aftertreatment 1 Diesel Exhaust Fluid Tank Level : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
1761-4 3130-4 Aftertreatment 1 Diesel Exhaust Fluid Tank Level : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3031-3 3134-3 Aftertreatment 1 Diesel Exhaust Fluid Tank Temperature : Voltage Above Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged.
3031-4 3134-4 Aftertreatment 1 Diesel Exhaust Fluid Tank Temperature : Voltage Below Normal The ECM detects signal voltage that is not in the acceptable range.
The code is logged. The 5 VDC signal for the Diesel Exhaust Fluid (DEF) tank level sensor is routed to terminal 1 of the tank header unit. The 5 VDC signal for the DEF tank temperature sensor is routed to terminal 3 of the tank header unit. The sensor return is shared and is routed to terminal 2 of the tank header unit. The ECM provides short circuit protection for the internal power supply. A short circuit to the battery will not damage the internal power supply.Note: The tank header unit houses the DEF tank temperature and the DEF tank level sensors. The sensors are not serviceable individually.
Illustration 1 g03811036
Schematic diagram for the DEF tank header
Illustration 2 g03811042
(1) DEF level signal
(2) Sensor return
(3) DEF temperature signal Complete the procedure in the order in which the steps are listed.
Table 2
Troubleshooting Test Steps Values Results
1. Check for Diagnostic Codes
A. Establish communication between the electronic service tool and the DEF Control Unit (DCU) . Refer to Troubleshooting, "Electronic Service Tools", if necessary.
B. Turn the keyswitch to the ON position.
C. Check for "-3" or " -4" active or logged codes.
Diagnostic code
Result: A -3 diagnostic code is active.
Proceed to Test Step 2.
Result: A -4 diagnostic code is active.
Proceed to Test Step 3.
2. Create a Short at the Sensor Connector
A. Verify that the harness connector is free of debris, free of corrosion and securely connected.
B. Install a jumper wire between the appropriate signal and return wire at the sensor connector in order to create a short. Refer to Illustration 2.
C. Turn the keyswitch to the ON position.
D. Monitor the diagnostic codes on the electronic service tool. Check for an active -4 diagnostic code for the suspect sensor.
E. Turn the keyswitch to the OFF position.
Short created
Result: A -4 diagnostic code became active after creating the short at the sensor connector. The wiring is OK.
Repair: Replace the DEF tank header assembly. Refer to the Disassembly and Assembly manual.
Verify that the fault is resolved by cycling the keyswitch to the OFF position for 2 minutes. Turn to the keyswitch to the ON position and check
Parts seal Caterpillar catalog:
1361217
SEAL
Caterpillar
Caterpillar
1361188
SEAL KIT-
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
1361103
SEAL KIT-
Caterpillar
Caterpillar
Caterpillar
1362049
SEAL KIT-
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar