parts catalog

SEAL-BUFFER 1400234 - Caterpillar

1400234 SEAL-BUFFER Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 1400234 SEAL-BUFFER
Weight: 0.01 pounds 0 kg.

Buy SEAL-BUFFER 1400234 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


1. Remove the oil from the tandem housings to a level below the bottom of cover (1). Remove cover (1). 2. Remove the bolts and locks that hold retainer (2) in position. Use two 3/8"-16 NC forcing screws (3) to remove the retainer. 3. Install a 1/2"-13 NC forged eyebolt (5) in axle (4). Pull the axle out far enough to fasten a strap and a hoist to the axle. Remove axle (4). The weight of the axle is approximately 50 lb. (23 kg). 4. Use tooling (A) to remove bearing (6) from the axle.Install Axles
1. Heat bearing (1) to a maximum temperature of 150°F (66°C). Heat the bearing for a maximum of 15 minutes. Install bearing (1) on axle (2). After the bearing has become cool, make sure the bearing is against its seat with tooling (A). 2. Put axle (2) in position on the machine. The weight of the axle is 50 lb. (23 kg). Remove the strap and install a 1/2"-13 NC forged eyebolt (3) in axle. Install the axle the rest of the way into the machine. 3. Make sure O-ring seal (6) is in position on retainer (7). Install retainer (7) so that notch (4) is in alignment with one of the grooves (slots) (5) on the nut. Install the bolts and locks that hold the retainer in place. 4. Install the gasket and cover (8). Put 7M7456 Thread Lock on the bolts and install the bolts that hold the cover in place.5. Fill the tandem housing and bevel gear case with oil to the correct level.

Parts seal Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.