SEAL GP-DUO-CONE 1456035 - Caterpillar

Illustration 1 g06051998
Illustration 2 g06305738
Table 1
Specification for 476-2912 Drive Shaft Gp
Item Qty Part Specification Description
Note: The drive shaft yokes must be in alignment (in-phase) when the drive shafts are installed.
Note: Prior to assembly, wipe the mounting surfaces of the bearing caps and the yokes until clean.
Note: Prior to assembly, apply Bostik Never-Seez Marine Grade to the drive shaft splines.
1 1 487-9856 Slip Joint -
2 8 096-9986 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
Torque to 100 5 N m (74 4 lb ft).
3 8 189-6123 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
Torque to 150 15 N m (110 11 lb ft).
4 8 8T-0281 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
Torque to 318 6 N m (235 4 lb ft).
5 4 189-6123 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
Torque to 150 15 N m (110 11 lb ft).
6 1 487-9857 Universal Joint Gp -
7 1 8T-0362 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
Torque to 520 70 N m (385 50 lb ft).
8 1 419-2154 Slip Joint -
9 6 8T-4175 Bolt Apply Loctite 263 to the threads of the bolts prior to assembly.
10 1 419-2155 Universal Joint Gp -
11 1 419-2146 Yoke Apply Bostik Never-Seez Marine Grade to the splines prior to assembly.
12 2 8T-4186 Bolt Apply Bostik Never-Seez Marine Grade to the threads of the bolts prior to assembly.