1521310 SEAL-LIP TYPE Caterpillar parts
D5H, D5M, D6M, R1300, R1300G, R1300G II, R1600, R1600G, R1600H, R1700G
Rating:
Alternative (cross code) number:
CA1521310
152-1310
1521310
CA1521310
152-1310
1521310
Weight: 0.01 pounds 0 kg.
Information:
AXIAL WIDTH
7.92
mm
BORE DIAMETER
22.23
mm
CONSTRUCTION TYPE
DB
MATERIAL
Nitrile Rubber (NBR) - 75 Duro
SEAL OD
22.35
mm
SHAFT OD
12.7
mm
LOAD HAUL DUMP, TRACK-TYPE TRACTOR,
Compatible equipment models: 1521310:
Number on catalog scheme:
6
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2264 Puller Group 1
4B-3903 Bolt 2
1P-0456 Plate 1
4B-4277 Washer 2
B 9S-9152 Bearing Puller Gp 1
C 9S-5565 Pin Puller Sleeve As 1 Start By:
Remove the water pump.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021798
Remove O-ring seal (10) from housing (1).
Use Tooling (A) to remove impeller (4) from shaft (6).
Remove bolts (3) from housing (1). Remove retainer (5) and water pump shaft (6) from the housing.
Use Tooling (C) and remove gear (2) from water pump shaft (6).
Use a press and Tooling (B) to remove bearing assembly (8) from water pump shaft (6).
Invert the housing and drive or press seal group (7) out of the housing.
Invert the housing and drive or press lip seal (9) out of the housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2264 Puller Group 1
4B-3903 Bolt 2
1P-0456 Plate 1
4B-4277 Washer 2
B 9S-9152 Bearing Puller Gp 1
C 9S-5565 Pin Puller Sleeve As 1 Start By:
Remove the water pump.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021798
Remove O-ring seal (10) from housing (1).
Use Tooling (A) to remove impeller (4) from shaft (6).
Remove bolts (3) from housing (1). Remove retainer (5) and water pump shaft (6) from the housing.
Use Tooling (C) and remove gear (2) from water pump shaft (6).
Use a press and Tooling (B) to remove bearing assembly (8) from water pump shaft (6).
Invert the housing and drive or press seal group (7) out of the housing.
Invert the housing and drive or press lip seal (9) out of the housing.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
561M, 561N, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM, PM-201, PM-565, PM-565B
561M, D5M, D6M
6V5191
SEAL
561M, 950, D5M, D5N, D6M, D6N
561M, 950, D5M, D5N, D6M, D6N
1327059
SEAL-WINDOW
953C
953C
1385749
SEAL
953C
953C
1385748
SEAL
953C
953C
572R, 572R II, 627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 814, 815, 844, 844H, 950, 955K, 955L, 966C, 988F II, 990, 990 II, 990H, 994, 994D, 994F, 994H, D10, D11N,...
6Y6278
SEAL GP-DUO-CONE
D6R, D7R, D8R
D6R, D7R, D8R
572R II, 583R, 583T, 587R, 587T, D6R, D7R, D7R II, D7R XR, D8R, D8T, PL83, PL87
561N, 572R, 572R II, 587T, D10R, D10T, D11R, D11T, D5M, D5N, D6M, D6N, D6R, D6R II, D7R, D7R II, PL87
517, 527, 561M, 561N, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
1434047
SEAL-LIP TYPE
D5H, D5M, D6M
D5H, D5M, D6M