SEAL-PISTON 1617146 - Caterpillar

Identification
Electronic Modular Control Panel (EMCP)The model number of the Electronic Modular Control Panel (EMCP) is located on the name plate on the inside bottom of the control panel. The model number is based on panel options and generator ratings. This information is necessary for programming the ECM. There are seventeen characters in the model number and is similar to "EB3CAS3A1BASP1AE6"The following is a description of the equipment which is specified by the model number. For the most accurate description and specifications, always check print 7C1000 that is included with the EMCP.
Model Number - First, Second And Third Character
Model Number - Fourth Character
Current Model Number - Fifth Character The above fifth character information applies to current Electronic Modular Control Panels with "2" or greater as the seventeenth character of the model number. For the correct settings, always check print 7C1000 that is included with the generator set.
Earlier Model Number - Fifth Character The above fifth character information applies to earlier Electronic Modular Control Panels with "1" as the seventeenth character of the model number. For the correct settings, always check print 7C1000 that is included with the generator set. The above fifth character information also applies to earlier Electronic Modular Control Panels with "0" as the seventeenth character of the model number. Except for the following: character G is a 3508 prime, character J is a 3512 prime and character L is a 3516 prime. For the correct settings, always check print 7C1000 that is included with the generator set.
Model Number - Sixth Character
Model Number - Seventh, Eighth And Ninth Character
Model Number - Tenth, Eleventh And Twelfth Character
Model Number - Thirteenth, Fourteenth And Fifteenth Character
Model Number - Sixteenth And Seventeenth CharacterAbbreviations
Symbols
Components Location
7C1000 Control Panel
(1) ALM (alarm module) or SLM (synchronizing light module) optional. (2) ACM (AC meter module). (3) VAR (voltage adjust rheostat). (4) GS (governor switch) or SP (speed adjust potentiometer) optional. (5) SAS (start aid switch) optional. (6) ECM (engine control module). (7) Switch (display hold switch). (8) PLS (panel light switch) optional. (9) LTS (lamp/display test switch). (10) AVS (ammeter - voltmeter phase selector switch). (11) ESPB (emergency stop push button). (12) ECS (engine control switch). For location and specifications on components located on the engine, make reference to the respective Engine Service Manual.
Control Panel Interior
(1) ALM (alarm module) or SLM (synchronizing light module) optional. (2) ACM (AC meter module). (3) VAR (voltage adjust rheostat). (4) GS (governor switch) or SP (speed adjust potentiometer) optional. (5) SAS (start aid switch) optional. (6) ECM (engine control module). (8) PLS (panel light switch) optional. (9) LTS (lamp/display test switch). (10) AVS (ammeter - voltmeter phase selector switch). (11) ESPB (emergency stop push button). (12) ECS (engine control switch). (13) Fuses (F1 through F8). (14) Switch (overspeed verify). (15) F11 through F13 (fuses). (16) SMMS2 (starter motor magnetic switch two) optional. (17) SMMS1 (starter motor magnetic switch one). (18) CB (circuit breaker). (19) RPR (reverse power relay) optional. (20) AUX (auxiliary relay) optional. (21) 2301 (electronic governor speed control)