1645165 SEAL Caterpillar parts
321C, 321D LCR, 325C, 328D LCR
Rating:
Alternative (cross code) number:
CA1645165
164-5165
1645165
CA1645165
164-5165
1645165
Weight: 0.01 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
4
For full view, you need register
Information:
The rated load, as specified on the attachment rating chart, is based on the manufacturer's standard machine configuration as stated below:Includes lubricants, full fuel tank, ROPS cab, the operator and 15.5 × 25 - 8 PR (L2) tires.Modifications to or attachments added to the above standard configurations may affect the rated load. Rated load is determined by stability, hydraulic and structural limitations.The following tables list Caterpillar offered attachments that reduce the rated load. For machine configurations not listed, see your Caterpillar dealer for guidance.IT12B
IT14B
Operating Techniques - General
Typical Examples
Be certain that the attachment used is appropriate for the work performed. Exceeding the machine limits will reduce the service life of the machine. For good operator vision and loader stability, carry the loaded attachment low, approximately 40 cm (15 inches) above the ground.Utilize wait time to clean and level the work area.Maintain traction by avoiding excessive down pressure on the attachment.When working in hard material use attachment teeth or bolt-on cutting edges. To control dumping, move the tilt control lever to the right. Then return to the HOLD position. Repeat until the attachment is empty. To keep dust away from the engine and maintain visibility, dump with the wind to your back.Dozing
Do not doze with the attachment in the tilt forward position to avoid bucket damage.
When dozing, keep the bucket bottom parallel to the ground.Dumping
Use the attachment stops for maximum dumping angle.
Striking
IT14B
Operating Techniques - General
Typical Examples
Be certain that the attachment used is appropriate for the work performed. Exceeding the machine limits will reduce the service life of the machine. For good operator vision and loader stability, carry the loaded attachment low, approximately 40 cm (15 inches) above the ground.Utilize wait time to clean and level the work area.Maintain traction by avoiding excessive down pressure on the attachment.When working in hard material use attachment teeth or bolt-on cutting edges. To control dumping, move the tilt control lever to the right. Then return to the HOLD position. Repeat until the attachment is empty. To keep dust away from the engine and maintain visibility, dump with the wind to your back.Dozing
Do not doze with the attachment in the tilt forward position to avoid bucket damage.
When dozing, keep the bucket bottom parallel to the ground.Dumping
Use the attachment stops for maximum dumping angle.
Striking
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
3462780
SEAL
321D LCR
321D LCR
3462779
SEAL
321D LCR
321D LCR
3462753
SEAL
321D LCR
321D LCR
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L,...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E...
3550463
SEAL-AIR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3550455
SEAL-AIR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3550453
SEAL-AIR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3550452
SEAL-AIR
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3423574
SEAL
323E L, 324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E LN, 336D L, 336D LN, 336E, 336E H, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349D L, 349E, 349E L VG, 374F L, 390F L
323E L, 324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E LN, 336D L, 336D LN, 336E, 336E H, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349D L, 349E, 349E L VG, 374F L, 390F L
3423572
SEAL
323E L, 324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E LN, 336D L, 336D LN, 336E, 336E H, 336E HVG, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349D L, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
323E L, 324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E LN, 336D L, 336D LN, 336E, 336E H, 336E HVG, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349D L, 349E, 349E L HVG, 349E L VG, 374F L, 390F L