SEAL-O-RING 1697487 - Caterpillar

Table 1
Required Tools
Part Number Part Name Quantity
6V-7775 Air Pressure Gauge 1
8J-7844 Adapter Fitting 1
3K-0360 O-Ring Seal 1
5P-2725 Probe Seal Adapter 1
164-2192 Pressure Probe 1
5P-4487 Adapter 1
5P-2720 Probe Adapter Group 1
Illustration 1 g01996279
Pressure test ports for G3304B and G3306B engines
(1) Port that is used to measure the pressure at the water pump outlet
(2) Port that is used to measure the pressure at the water pump inlet
Illustration 2 g02371797
Pressure test ports for CG137-8 and CG137-12 engines
(1) Port that is used to measure the pressure at the water pump outlet
(2) Port that is used to measure the pressure at the water pump inlet
Making contact with a running engine can cause burns from hot parts and can cause injury from rotating parts.When working on an engine that is running, avoid contact with hot parts and rotating parts.
The pressure rise is the difference between inlet pressure and outlet pressure of the water pump. The pressure rise is an indicator of the condition of the water pump. Use port (1) to measure the water pump outlet pressure. Use port (2) to measure the pressure at the water pump inlet.To calculate the pressure rise, subtract the inlet pressure from the outlet pressure. The pressure rise must maintain a minimum of 50 kPa (7.5 psi) during the following conditions:
Normal operating temperature of the engine
1800 rpm engine speed
Full engine load