1719451 SEAL Caterpillar parts
307C, 308C
Rating:
Alternative (cross code) number:
CA1719451
171-9451
1719451
CA1719451
171-9451
1719451
Weight: 0.27 pounds 0 kg.
MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Information:
April 25, 2001
(Revised September 2001)
U-99
A-66
AU-54
S-42
H-36
O-75
Partsstock action only CERTAIN 8S9906 RATCHET PULLERSNEED TO BE REMOVED FROM DEALERS INVENTORY, WORK AREAS AND TOOLBOXES
0633 PI70022
This Revised Service Letter replacesthe April 25, 2001 (Revised August 2001) Service Letter. Changes have beenmade to the Notice to Customers.TERMINATION DATE
April 30, 2002PROBLEM
Certain Ratchet Pullers need to be removed fromdealers inventory, work areas and toolboxes. Some of these pullers mayhave an improper crimp on the ferrule that attaches the cable to the bottomhook. Pullers with this improper crimping condition may unexpectedly releasethe load at less than rated capacity. The Caterpillar part number affectedis 8S9906 Ratchet Pullers with a serial number ending in "C00" through"L00". The serial number is located on a metal tab riveted to the framejust under the top hook.ACTION REQUIREDRemove all 8S9906 Ratchet Pullers, purchasedbetween January 2000 and April 2001, from parts stock and any that maybe in use. Also, the dealer should post the attached notice on the Partscounters throughout the dealership. To ensure that these parts are notreused or salvaged, all parts removed should be cut in half before scrapping. The updated 8S9906 Ratchet Pullers have3 crimps (instead of 2) at the hook on the cable assembly. Reworked assembliesalso have a one inch, light purple sticker on the frame of the unit witha date of March 2001. Any Ratchet Pullers without a serial number are notaffected.SERVICE CLAIM ALLOWANCES
Submit one claim for all 8S9906 Ratchet Pullerswith a serial number ending in "C00" through "L00", removed from partsstock.PARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.Attachments: Owner notices
TO CUSTOMERS WHO MAY HAVE PURCHASED 8S9906 Ratchet Pullers:
SAFETY - Return All 8S9906 Ratchet Pullerswith a serial number ending in "C00" through "L00" and only 2 crimps atthe hook to Your Caterpillar DealerTOOL INVOLVED - 8S9906 Ratchet Pullers purchasedbetween January 2000 to April 2001 with a serial number ending in "C00"through "L00" and only 2 crimps at the hookDear Caterpillar Tool Owner:All 8S9906 Ratchet Pullers purchased on orafter January 2000 with a serial number ending in "C00" through "L00" withonly 2 crimps at the hook need to be returned to your Caterpillar dealer.The pullers are sometimes used to lift and hold heavy objects. These pullersmay fail and drop the load unexpectedly. Remove pullers from all work areasand toolboxes. Some of these pullers may have an improper crimp on theferrule that attaches the cable to the bottom hook. Pullers with this impropercrimping condition may unexpectedly release the load at less than ratedcapacity. The Caterpillar part number affected is 8S9906 Ratchet Pullerwith a serial number ending in "C00" through "L00". The serial number islocated on a metal tab riveted to the frame just under the top hook. Theserial number is located on a metal tab riveted to the frame just underthe top hook. If there is no serial number, the tool is good. If thereare 3 crimps at the hook, the puller is good.Contact your local Caterpillar dealer immediatelyif you have purchased one of these 8S9906 Ratchet Pullers. They will bereplaced at no charge to you.We regret
(Revised September 2001)
U-99
A-66
AU-54
S-42
H-36
O-75
Partsstock action only CERTAIN 8S9906 RATCHET PULLERSNEED TO BE REMOVED FROM DEALERS INVENTORY, WORK AREAS AND TOOLBOXES
0633 PI70022
This Revised Service Letter replacesthe April 25, 2001 (Revised August 2001) Service Letter. Changes have beenmade to the Notice to Customers.TERMINATION DATE
April 30, 2002PROBLEM
Certain Ratchet Pullers need to be removed fromdealers inventory, work areas and toolboxes. Some of these pullers mayhave an improper crimp on the ferrule that attaches the cable to the bottomhook. Pullers with this improper crimping condition may unexpectedly releasethe load at less than rated capacity. The Caterpillar part number affectedis 8S9906 Ratchet Pullers with a serial number ending in "C00" through"L00". The serial number is located on a metal tab riveted to the framejust under the top hook.ACTION REQUIREDRemove all 8S9906 Ratchet Pullers, purchasedbetween January 2000 and April 2001, from parts stock and any that maybe in use. Also, the dealer should post the attached notice on the Partscounters throughout the dealership. To ensure that these parts are notreused or salvaged, all parts removed should be cut in half before scrapping. The updated 8S9906 Ratchet Pullers have3 crimps (instead of 2) at the hook on the cable assembly. Reworked assembliesalso have a one inch, light purple sticker on the frame of the unit witha date of March 2001. Any Ratchet Pullers without a serial number are notaffected.SERVICE CLAIM ALLOWANCES
Submit one claim for all 8S9906 Ratchet Pullerswith a serial number ending in "C00" through "L00", removed from partsstock.PARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.Attachments: Owner notices
TO CUSTOMERS WHO MAY HAVE PURCHASED 8S9906 Ratchet Pullers:
SAFETY - Return All 8S9906 Ratchet Pullerswith a serial number ending in "C00" through "L00" and only 2 crimps atthe hook to Your Caterpillar DealerTOOL INVOLVED - 8S9906 Ratchet Pullers purchasedbetween January 2000 to April 2001 with a serial number ending in "C00"through "L00" and only 2 crimps at the hookDear Caterpillar Tool Owner:All 8S9906 Ratchet Pullers purchased on orafter January 2000 with a serial number ending in "C00" through "L00" withonly 2 crimps at the hook need to be returned to your Caterpillar dealer.The pullers are sometimes used to lift and hold heavy objects. These pullersmay fail and drop the load unexpectedly. Remove pullers from all work areasand toolboxes. Some of these pullers may have an improper crimp on theferrule that attaches the cable to the bottom hook. Pullers with this impropercrimping condition may unexpectedly release the load at less than ratedcapacity. The Caterpillar part number affected is 8S9906 Ratchet Pullerwith a serial number ending in "C00" through "L00". The serial number islocated on a metal tab riveted to the frame just under the top hook. Theserial number is located on a metal tab riveted to the frame just underthe top hook. If there is no serial number, the tool is good. If thereare 3 crimps at the hook, the puller is good.Contact your local Caterpillar dealer immediatelyif you have purchased one of these 8S9906 Ratchet Pullers. They will bereplaced at no charge to you.We regret
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
4J0527
SEAL-O-RING
1090, 115, 1190, 1190T, 120G, 120M, 1290T, 12M, 1390, 140H, 140M, 140M 2, 143H, 14H, 14M, 153, 160H, 160M, 160M 2, 163H, 16H, 16M, 173B, 216B, 216B3, 226B, 226B3, 2290, 235, 235B, 235C, 235D, 2384C, 2...
1090, 115, 1190, 1190T, 120G, 120M, 1290T, 12M, 1390, 140H, 140M, 140M 2, 143H, 14H, 14M, 153, 160H, 160M, 160M 2, 163H, 16H, 16M, 173B, 216B, 216B3, 226B, 226B3, 2290, 235, 235B, 235C, 235D, 2384C, 2...
1659280
SEAL-LIP TYPE
307B, 307C, 307D, 308C, 308D, 312C L, 735, 735B, 740, 740B, TH355B
307B, 307C, 307D, 308C, 308D, 312C L, 735, 735B, 740, 740B, TH355B
4J0526
SEAL-O-RING
153, 163, 206B, 212B, 236B, 236B3, 301.5, 301.6C, 304C CR, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 312...
153, 163, 206B, 212B, 236B, 236B3, 301.5, 301.6C, 304C CR, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311, 311B, 312...
0951586
SEAL-O-RING
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D...
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D...
0951582
SEAL-O-RING
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 2384C, 2484C, 24M, 301.5, 301.6C, 302.5, 302.5C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305...
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 2384C, 2484C, 24M, 301.5, 301.6C, 302.5, 302.5C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305...
0951592
SEAL-O-RING
2384C, 2484C, 301.5, 304, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 3...
2384C, 2484C, 301.5, 304, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 3...
0951596
SEAL-O-RING
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 31...
1090, 1190, 1190T, 1290T, 1390, 2290, 2384C, 2390, 2391, 2484C, 2491, 2590, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 311, 31...
0951725
SEAL-O-RING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304D CR, 304E, 305, 305.5, 305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304D CR, 304E, 305, 305.5, 305.5E, 306, 306E, 307, 307B, 307C, 307D, 307E, 308C, 308D,...
0951723
SEAL-O-RING
2384C, 2484C, 301.5, 304, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 320B FM LL, 320C, 320C FM, 320D, 320D L, 32...
2384C, 2484C, 301.5, 304, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 320B FM LL, 320C, 320C FM, 320D, 320D L, 32...
0933328
SEAL-O-RING
303.5C, 303C CR, 304, 304D CR, 305, 307, 307B, 307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318E...
303.5C, 303C CR, 304, 304D CR, 305, 307, 307B, 307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318E...
0951573
SEAL-O-RING
2384C, 2484C, 303, 307, 307C, 308C, 308E, 308E CR, 308E SR, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, 31...
2384C, 2484C, 303, 307, 307C, 308C, 308E, 308E CR, 308E SR, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, 31...
1659281
SEAL-LIP TYPE
307B, 307C, 307D, 308C, 308D, 324D L, 325D, 325D MH, 330C, 330D, 330D L, 330D MH, 336D L, 345C, 345C MH, M325D L MH, M325D MH, M330D
307B, 307C, 307D, 308C, 308D, 324D L, 325D, 325D MH, 330C, 330D, 330D L, 330D MH, 336D L, 345C, 345C MH, M325D L MH, M325D MH, M330D
3743665
SEAL-LIP TYPE
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
3743664
SEAL-LIP TYPE
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
3743668
SEAL-LIP TYPE
307C, 307D, 308C, 308D, 308E SR
307C, 307D, 308C, 308D, 308E SR
1709838
SEAL-BUFFER
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
307C, 307D, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
3743669
SEAL-LIP TYPE
307C, 307D, 308D, 308E, 308E CR, 308E SR, 308E2 CR
307C, 307D, 308D, 308E, 308E CR, 308E SR, 308E2 CR
1659281
SEAL-LIP TYPE
307B, 307C, 307D, 308C, 308D, 324D L, 325D, 325D MH, 330C, 330D, 330D L, 330D MH, 336D L, 345C, 345C MH, M325D L MH, M325D MH, M330D
307B, 307C, 307D, 308C, 308D, 324D L, 325D, 325D MH, 330C, 330D, 330D L, 330D MH, 336D L, 345C, 345C MH, M325D L MH, M325D MH, M330D
1506343
SEAL
307C
307C
1500852
SEAL
307C, 308C
307C, 308C
1884056
SEAL
304, 304C CR, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307C, 307D, 308C, 308D, 308E
304, 304C CR, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307C, 307D, 308C, 308D, 308E
1850355
SEAL
307C, 308C
307C, 308C
1884053
SEAL
307C, 307D, 308C, 308D, 308E, H110E S
307C, 307D, 308C, 308D, 308E, H110E S
1991903
SEAL-O-RING
305, 307C, 325B
305, 307C, 325B