1737715 SEAL-LIP TYPE Caterpillar parts
735, 735B, 740, 740B, 844, 990 II, 994, 994D, D11R, D11T
Rating:
Alternative (cross code) number:
CA1737715
173-7715
1737715
CA1737715
173-7715
1737715
Weight: 0.48 pounds 0 kg.
Information:
AXIAL WIDTH
12.7
mm
BORE DIAMETER
158.75
mm
CONSTRUCTION TYPE
DBI
MATERIAL
FKM Rubber - 80 Duro
SEAL OD
0
mm
SHAFT OD
127
mm
ARTICULATED TRUCK, WHEEL LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-03-23
2022-03-23
Compatible equipment models: 1737715:
Number on catalog scheme:
71
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 1P-0808 Multipurpose Grease -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01029786
Install bearing (4) in pulley (5) .
Install lip seal (3) with Tooling (A), as shown. Apply Tooling (B) to the lip of the seal.
Install spacer (2) so the end with the taper is toward the inside of pulley (5) .
Install spacer (6) and bearing (9) in the front of pulley (5) .
Position O-ring seal (7) on the front of pulley (5). Install the pulley on shaft assembly (1) .
Install retainer (10) and bolts (11). Tighten bolts (11) to a torque of 25 6 N m (18 4 lb ft).
Install the fan adapter on pulley (5). Tighten bolts (8) to a torque of 47 9 N m (35 7 lb ft).
Fill the fan drive with Tooling (B) .End By: Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
B 1P-0808 Multipurpose Grease -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01029786
Install bearing (4) in pulley (5) .
Install lip seal (3) with Tooling (A), as shown. Apply Tooling (B) to the lip of the seal.
Install spacer (2) so the end with the taper is toward the inside of pulley (5) .
Install spacer (6) and bearing (9) in the front of pulley (5) .
Position O-ring seal (7) on the front of pulley (5). Install the pulley on shaft assembly (1) .
Install retainer (10) and bolts (11). Tighten bolts (11) to a torque of 25 6 N m (18 4 lb ft).
Install the fan adapter on pulley (5). Tighten bolts (8) to a torque of 47 9 N m (35 7 lb ft).
Fill the fan drive with Tooling (B) .End By: Install the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Install".
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
AP-1055B, AP-655C, AP-655D, AP1055E, BG-2455D, BG1055E, BG655D, D10N, D10R, D10T, D10T2, D11R, D11T
CB-44B, D11R, D11T
5130, 5130B, D11N, D11R, D11T
D10N, D10R, D10T, D10T2, D11R, D11T
D11R, D11T
D10, D11N, D11R, D11T
D10, D11N, D11R, D11T
D11N, D11R, D11T
D10, D11N, D11R, D11T
D11N, D11R
D11N, D11R, D11T
824G, 824G II, 824H, 826G, 826G II, 826H, 844, 844H, 844K, D8L, D9N, D9R
994, 994D, 994F, 994H
785, 994
9X2530
SEAL
814B, 815B, 826C, 950B, 950F, 966F, 980C, 980F
814B, 815B, 826C, 950B, 950F, 966F, 980C, 980F
5V8467
SEAL
815B, 826C, 950B, 966D, 980C
815B, 826C, 950B, 966D, 980C
5V8657
SEAL
815B, 826C, 950B, 966D, 980C
815B, 826C, 950B, 966D, 980C
120G, 12G, 130G, 140G, 14G, 16G, 966D, 980C
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 994, 994D, 994F, 994H
9X3550
SEAL AS
994
994
994
9X4606
SEAL-LIP TYPE
789, 789B, 793, 793B, 990, 990 II, 994, D11R
789, 789B, 793, 793B, 990, 990 II, 994, D11R
789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 994, 994D, 994F, 994H
994, 994D, 994F, 994H