SEAL KIT- 1770888 - Caterpillar

Features/Benefits
* New low cost pressure sensors for use with 131-5050 DataView * Auto ID built in - no Auto ID cable is required* Plug directly into DataView Analog channels* 1% accuracy * CE CertifiedSpecifications/Technical Information
3 Pressure ranges available - 0 to 689 kPa (0 to 100 psi)0 to 6890 kPa (0 to 1000 psi)0 to 51 675 kPa (0 to 7500 psi)Accuracy - 1% of full scale absolute 1% of reading typicalProof pressure - 200% of Rated RangeBurst pressure - 500% of Rated RangeConnection - Male 1/4 - 18 NPTF ThreadConnector - Male 5 pin DINOperating temperature range - -25° to 65°C (-13° to +150°F)Maximum diameter - 26 mm (1.02 in)Sensor length - 105 mm (4.13 in) approx.Cable Length - 150 mm (5.90 in) approx.Weight - 0.11 kg (.25 lb)DataView Auto ID resistor built in
Pressure Sensors These new sensors are not designed to be used with the 4C-6800 Caterpillar Data Logger. They will not read correct on this Data Logger.Reference
Tool Operating Manual; NEHS0662, Caterpillar DataView