SEAL KIT 1788382 - Caterpillar

Illustration 1 g01969513
Typical example
(1) Before you assemble the steering column assembly (3) in the metering pump group, apply 4.5 grams (0.2 ounce) of 1P-0808 Multipurpose Grease to the top of the cavity for the splines in the metering pump. (2) Before assembly, apply 154-9731 Thread Lock Compound to the threads of four bolts. (4) Before assembly, apply 4C-4030 Thread Lock Compound to the threads of four bolts.
Illustration 2 g01970476
Detail A
Adjustable steering column group
(5) 248-5478 Spring Length under test force ... 88.39 mm (3.480 inch)Test force ... 166 22 N (37 5 lb)Free length after test ... 61.5 mm (2.42 inch)Outside diameter ... 14 mm (0.6 inch)Note: The spring should be installed from the upper hole on the left hand side of the adjustable steering column group to the lower hole on the left hand side of the adjustable steering column group. (6) Torque for the nut ... 82 5 N m (60 4 lb ft) (7) Torque for the nut ... 101.7 2.0 N m (75.0 1.5 lb ft) (8) Torque for the stop screw ... 17 1 N m (150 9 lb in) (9) Torque for the nut ... 65 2 N m (48 1 lb ft)From the center position, the adjustable steering column group can be moved in either direction. (B) Maximum up tilt angle ... 21 degrees (C) Maximum down tilt angle ... 14 degrees