SEAL KIT- 1859535 - Caterpillar

Illustration 1 g01319966
Typical example Information for Air Conditioner System ServiceThis message is located inside the cab.Do not work on the air conditioning system until you have read the service manual and you understand the service manual.
Illustration 2 g01294295
Do Not Load Material on the CanopyThis message is located inside the cab.Do not load any material on the canopy of the truck.
Illustration 3 g01147071
24 Volt Electrical SystemThis message is located by the auxiliary start receptacle inside an access door.This machine is equipped with a 24 volt electrical system.
Illustration 4 g01126478
Product LinkIf your machine is equipped with the Product Link System, this additional message is located in the cab.The Product Link System is a satellite communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the satellite. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services.
Illustration 5 g01418953
Diverter Valve (Tow Valve)This message is located by the diverter valve on the left inside frame rail behind the fuel tank.Move the diverter valve in order to tow a disabled machine. Refer to Operation and Maintenance Manual, "Towing with Inoperable Engine" for more information.
Illustration 6 g01082446
ELC (Extended Life Coolant) Cooling SystemThis message is located on the reservoir for the radiator inside an access door.This machine is shipped from the factory with ELC.
Illustration 7 g00955999
Diesel Fuel RecommendationsThis message is located near any diesel fuel fill points.Refer to Operation and Maintenance Manual, "Lubricant Viscosities (Fluids Recommendations)" for information on diesel fuel recommendations.
Illustration 8 g02379417
Engine Idle Shutdown (EIS) (If Equipped)This message is located next to the engine start switch. Refer to Operation and Maintenance Manual, "Operator Controls" for more information.
Illustration 9 g02535436