SEAL KIT- 1864380 - Caterpillar

"Calibrations"
The following selections are available through the "Calibrations" submenu:
Truck Payload
InclinometerUse the appropriate arrow button to highlight the desired calibration from the list. Then press the "OK" button. Follow the directions that are displayed on the screen in order to perform the calibration."System Tests"
The following selections are available through the "System Tests" submenu:
Transmission stall test
Manual lube mode (if equipped)
Self test (functional test)"System Information"
The "System Information" submenu will display details about the software version and details about the ECM module for the following systems:
Advisor
Engine
Chassis
Brake
VIMS"Tattletale"
The tattletale feature allows the history of the machine to be recorded. The Tattletale submenu allows the viewing of extreme recorded values for each machine parameter that is active. When the "Active" submenu is selected, the following will be displayed:
All the indicators that were activated will light.
All the gauges will be set to the maximum value that was encountered during operation. This will be the minimum value for the fuel gauge.
The maximum ground speed will be displayed on the LCD.For the following selections on the Tattletale submenu, the Advisor screen will display the values that correspond with the indicators and gauges:
Brake oil temperature
Engine coolant temperature
Engine speed
Torque converter temperature
Fuel levelThe operator can step through the extreme recorded value of each parameter. The parameters that are inactive will be set to the minimum value."Settings" Menu
Illustration 15 g01320909The "Settings" menu option is accessed from the "Home" menu. Press the up arrow button or the down arrow button until "Settings" is highlighted. Then press the "OK" button.Operating conditions, preferences of the operator and requirements for operating efficiency dictate the need to adjust the parameters.The "Display Setup", "Machine", "Chassis", "Brake", "VIMS", "Engine" and "Auto Lube" selections that are available in the "Setttings" menu can be password protected with the "Service Mode" password in order to limit access to programmable parameters. The programmed parameters in the password protected menu options are available for viewing only. Cat ET must be used in order to set the password.The following selections are available through the "Settings" menu:"Display Setup"
Individual preferences for the "Display Setup" need to be saved in the operator profile.If the profile is set to "Factory Set", the preferences will revert to the default setting when the keyswitch is turned OFF. In order to save a preference, a profile must be selected or created. Refer to ""Create Profile"" in the ""Operator" Menu" information.The following selections are available through the "Display Setup" submenu:
Language
Units ("English" or "Metric")
Contrast
Headlights on dimming
Headlights off dimming
Date format
Time formatHeadlights on dimming will adjust the setting of the backlight for the display screen. This setting will determine the backlight intensity that will be used when the headlights are placed in the ON position.Headlights off dimming will adjust the setting of the backlight for the display screen. This setting will determine the backlight intensity that will be used when the headlights are placed in the OFF position."Machine"
The following selections are available through the "Machine" submenu:
Product identification
Machine identification"Chassis"
The following selections are available through the "Chassis" submenu:
Top Gear Limit
Body Up Gear Limit
Machine Overload Speed Limit
Machine Speed Limit
Fuel Economy