1879753 SEAL Caterpillar parts
365B, 365B II, 365C, 385B, 385C, 385C FS, 5090B
Rating:
Alternative (cross code) number:
CA1879753
187-9753
1879753
CA1879753
187-9753
1879753
Weight: 0.28 pounds 0 kg.
Information:
AXIAL WIDTH
8
mm
BORE DIAMETER
190
mm
MATERIAL
Polyurethane - 90 Duro
SEAL OD
190.2
mm
SHAFT OD
159.85
mm
EXCAVATOR, FRONT SHOVEL,
Compatible equipment models: 1879753:
Number on catalog scheme:
17
For full view, you need register
Information:
Note: An alarm will sound whenever the switch is in the UNLOCKING or LOCKING position.For further details, see Operation and Maintenance Manual, "Quick Coupler Operation".Seat Heater (21)
Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.
If equipped, the switch for the seat heater is located on the right console.
Seat Heater - In cold weather, the seat heater can be activated in order to improve operator comfort.
ON - Push down on the top of the seat heater switch in order to activate the seat heater.
OFF - Push down on the bottom of the seat heater switch in order to deactivate the seat heater.
Do not leave any heavy item or object with a sharp point on the seat.Do not cover the seat or seat back with a blanket, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.
Note: The thermostat in the seat heater deactivates when the temperature in the cab is above 10°C (50°F). The seat heater will not operate when the thermostat is deactivated.Leveling Switch (22)
Leveling Switch - Leveling switch (21) is used for smoother operation of the front parts for finish grading.
ON - Push the right side of the switch in order to have smoother combined movements. The machine will have better control for finish grading when leveling switch (22) is in the on position .
OFF - Push the left side of the switch in order to maximize production. The machine will have maximum boom speed when leveling switch (22) is in the off position .Overload Warning Device (23)
If equipped, the switch for the overload warning device is located on the right console.
Illustration 15 g01615354
Early type
Illustration 16 g01615363
Later type
Overload Warning Device - In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When this occurs, the bucket load should be reduced or the stick should be moved inward.
ON - Push the right side of the switch in order to activate the overload warning device.
OFF - Push the left side of the switch in order to deactivate the overload warning device.Smart Boom Control (24)
This machine may be equipped with SmartBoom Control. For more information, refer to Operation and Maintenance Manual, "SmartBoom Control".Service Port
Illustration 17 g03320855
Electronic Technician service port
An Electronic Technician (ET) service port is located on the right side of the cab. This service port allows service personnel to connect a laptop computer that is equipped with Electronic Technician. Service personnel can use electronic technician in order to diagnose machine and engine systems. Contact your Cat dealer for additional information.
Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.
If equipped, the switch for the seat heater is located on the right console.
Seat Heater - In cold weather, the seat heater can be activated in order to improve operator comfort.
ON - Push down on the top of the seat heater switch in order to activate the seat heater.
OFF - Push down on the bottom of the seat heater switch in order to deactivate the seat heater.
Do not leave any heavy item or object with a sharp point on the seat.Do not cover the seat or seat back with a blanket, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.
Note: The thermostat in the seat heater deactivates when the temperature in the cab is above 10°C (50°F). The seat heater will not operate when the thermostat is deactivated.Leveling Switch (22)
Leveling Switch - Leveling switch (21) is used for smoother operation of the front parts for finish grading.
ON - Push the right side of the switch in order to have smoother combined movements. The machine will have better control for finish grading when leveling switch (22) is in the on position .
OFF - Push the left side of the switch in order to maximize production. The machine will have maximum boom speed when leveling switch (22) is in the off position .Overload Warning Device (23)
If equipped, the switch for the overload warning device is located on the right console.
Illustration 15 g01615354
Early type
Illustration 16 g01615363
Later type
Overload Warning Device - In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When this occurs, the bucket load should be reduced or the stick should be moved inward.
ON - Push the right side of the switch in order to activate the overload warning device.
OFF - Push the left side of the switch in order to deactivate the overload warning device.Smart Boom Control (24)
This machine may be equipped with SmartBoom Control. For more information, refer to Operation and Maintenance Manual, "SmartBoom Control".Service Port
Illustration 17 g03320855
Electronic Technician service port
An Electronic Technician (ET) service port is located on the right side of the cab. This service port allows service personnel to connect a laptop computer that is equipped with Electronic Technician. Service personnel can use electronic technician in order to diagnose machine and engine systems. Contact your Cat dealer for additional information.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, ...
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, CR20, S25
328D LCR, 329D L, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 330D L, 336D L, 345B II, 345B II MH, 345B L, 345D L, 350, 365B, 365B II, 365B L, 365C, 365C L, 374D L, 375, 375 L, 385B, 385C, 5080,...
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 390D, 390D L
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L
345B II, 345C, 345C L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345C L, 345C MH, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385...
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
350, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2099638
SEAL AS
AD55, AD55B, AD60
AD55, AD55B, AD60
2099637
SEAL
AD55, AD55B, AD60
AD55, AD55B, AD60
2377868
SEAL AS
AD55
AD55
0951610
SEAL-O-RING
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 385C L MH, 5110B, E110B, E120B, E450, E650, W345B II, W345C MH
345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 385C L MH, 5110B, E110B, E120B, E450, E650, W345B II, W345C MH
4Z6225
SEAL
365C L MH, 385C L MH, 5110B
365C L MH, 385C L MH, 5110B
1672498
SEAL-WIPER
5110B
5110B