SEAL KIT- 1895382 - Caterpillar

Which Generate This Code:The Electronic Control Module (ECM) detects an absolute turbocharger compressor outlet pressure that is greater than 200 kPa (29 psi) under one of the following conditions:
Engine speed is less than low idle plus 50 rpm for five seconds.
Engine speed is greater than low idle and the rack is at the minimum for five seconds.The ECM has been powered for three seconds. None of the following diagnostic codes are active:
262-03
262-04
273-03
273-04
273-13System Response:The code is logged. The ECM flags turbocharger compressor outlet pressure as invalid data and a default value of 0 kPa (0 psi) is used.Test Step 1. Perform the following diagnostic procedure: Engine Sensor Open/Short TestResults:
OK - STOP
REPAIRED, OK - STOP