SEAL KIT- 1933117 - Caterpillar

Rework Procedure to Relocate the Toggle Switch Group
Illustration 1 g02462316
Illustration 2 g02462317
Detail of area AThe Illustration 2 shows the former location of toggle switch group (1) mounting on the 356-8381 Fuel Priming Pump and Primary Filter Gp (2) .Use the below procedure to relocate the toggle switch group from the former location to new location:
Illustration 3 g02464256
(B) Dimension 100 3 mm (3.9 0.1 inch) (C) Dimension 64 3 mm (2.5 0.1 inch) (D) Dimension 505 3 mm (19.9 0.1 inch)
Weld two weld bosses (3) to the frame assembly to the dimensions as shown in Illustration 3.
Illustration 4 g02464277
Install new plate assembly (6) with two bolts (4) and two hard washers (5) to the frame assembly as shown in Illustration 4.
Illustration 5 g02464318
Option 1: Install new chassis harness assembly (8) with three clips (10), two bolts (9), and two hard washers (5) as shown in Illustration 5. Tighten the bolts (9). Goto Step 5.
Illustration 6 g02641237
Option 2: Install new pump harness assembly (12) with three clips (10), two bolts (9), and two hard washers (5) as shown in Illustration 6. Tighten the bolts (9). Continue to Step 5.
Use cable straps (7) in order to tie the chassis harness assembly (8) with clips (10) as shown in Illustration 5.
Install new toggle switch group (11) to the plate assembly (6). Use cable strap to tie the toggle switch group with plate assembly.
Illustration 7 g02641276
Install identification plate (13) to the toggle switch group as shown in Illustration 7.