1956011 SEAL-O-RING Caterpillar parts
3054, 3054C, TH103, TH62, TH63, TH82, TH83
Rating:
Alternative (cross code) number:
CA1956011
195-6011
1956011
CA1956011
195-6011
1956011
Weight: 0.01 pounds 0 kg.
INDUSTRIAL ENGINE, TRUCK ENGINE,
Compatible equipment models: 1956011:
Information:
Introduction
This Special Instruction describes the procedure for adjusting the Forward microswitch of the Finger Tip Control (FTC) group. The instructions apply to the Pipelayers and the Track-Type Tractors that are listed above. Adjustment Procedure
Raise the FTC group as high as possible.
Illustration 1 g01422717
The Finger Tip Control group is shown. (1) 219-2391 Position Sensor Gp (2) Allen head screws (3) 234-2878 Plate
Remove the 219-2391 Position Sensor Gp (1). This Forward-Neutral-Reverse (FNR) sensor is secured with two Allen head screws (2). This action allows you to access the 234-2878 Plate (3) that protects the Forward and the Reverse microswitches.
Illustration 2 g01422510
The 234-2878 Plate (3) is shown. (3) 234-2878 Plate (4) Allen head screws
Remove the 234-2878 Plate (3). This plate is secured with three Allen head screws (4) .
Illustration 3 g01422512
The 234-2878 Plate has been removed in order to access the Forward microswitch (5). The two dashed arrows indicate the direction of movement during the adjustment. (5) Forward microswitch (6) Phillips screws (7) Actuator arm (8) Cam
Locate the Forward microswitch (5). The Forward microswitch is located at the front of the FTC group.
Loosen the two Phillips screws (6) that secure the Forward microswitch (5). Refer to Illustration 3.
Rotate the Forward microswitch (5) at the two Phillips screws (6) in the counterclockwise direction as far as possible. Refer to the dashed arrows in Illustration 3. This action moves the Actuator arm (7) away from the Cam (8) that is attached to the end of the FNR shaft.
Tighten the Phillips screws (6) in order to secure the Forward microswitch (5) in this position. Refer to Illustration 3.
Install the 234-2878 Plate (3). Use the Allen head screws (4) that were removed in Step 3. Refer to Illustration 2.
Install the FNC position sensor (1). Use the Allen head screws (2) that were removed in Step 2. Refer to Illustration 1.
Reposition the FTC group for proper access.
Start the machine and test the operation of the FTC group.
This Special Instruction describes the procedure for adjusting the Forward microswitch of the Finger Tip Control (FTC) group. The instructions apply to the Pipelayers and the Track-Type Tractors that are listed above. Adjustment Procedure
Raise the FTC group as high as possible.
Illustration 1 g01422717
The Finger Tip Control group is shown. (1) 219-2391 Position Sensor Gp (2) Allen head screws (3) 234-2878 Plate
Remove the 219-2391 Position Sensor Gp (1). This Forward-Neutral-Reverse (FNR) sensor is secured with two Allen head screws (2). This action allows you to access the 234-2878 Plate (3) that protects the Forward and the Reverse microswitches.
Illustration 2 g01422510
The 234-2878 Plate (3) is shown. (3) 234-2878 Plate (4) Allen head screws
Remove the 234-2878 Plate (3). This plate is secured with three Allen head screws (4) .
Illustration 3 g01422512
The 234-2878 Plate has been removed in order to access the Forward microswitch (5). The two dashed arrows indicate the direction of movement during the adjustment. (5) Forward microswitch (6) Phillips screws (7) Actuator arm (8) Cam
Locate the Forward microswitch (5). The Forward microswitch is located at the front of the FTC group.
Loosen the two Phillips screws (6) that secure the Forward microswitch (5). Refer to Illustration 3.
Rotate the Forward microswitch (5) at the two Phillips screws (6) in the counterclockwise direction as far as possible. Refer to the dashed arrows in Illustration 3. This action moves the Actuator arm (7) away from the Cam (8) that is attached to the end of the FNR shaft.
Tighten the Phillips screws (6) in order to secure the Forward microswitch (5) in this position. Refer to Illustration 3.
Install the 234-2878 Plate (3). Use the Allen head screws (4) that were removed in Step 3. Refer to Illustration 2.
Install the FNC position sensor (1). Use the Allen head screws (2) that were removed in Step 2. Refer to Illustration 1.
Reposition the FTC group for proper access.
Start the machine and test the operation of the FTC group.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
1746577
SEAL-O-RING
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-534B, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M315, PS-200B, TH62...
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-534B, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M315, PS-200B, TH62...
2880422
SEAL-OIL
3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 414E, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E,...
3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 414E, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E,...
1456858
SEAL
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-7...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-7...
1456856
SEAL
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-760, BG...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-760, BG...
1240506
SEAL
12M, 2384C, 2484C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315, 315B L, 315C, 316E L, 317, 318D2 L, 318E...
12M, 2384C, 2484C, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314E CR, 314E LCR, 315, 315B L, 315C, 316E L, 317, 318D2 L, 318E...
3297856
SEAL-O-RING
12M, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312B L, 312C, 315B L, 317, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 450E, 535D, 545D, 554, 559, 613G, 908, 914G, 924G,...
12M, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 312B L, 312C, 315B L, 317, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 450E, 535D, 545D, 554, 559, 613G, 908, 914G, 924G,...
1724844
SEAL
3054, 3054B, 3056, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 924G, 924GZ, AP-800C, BG-225B, BG-225C, CB-434C, CB-534C, CB-535B, CP-433C, C...
3054, 3054B, 3056, 312B L, 312C, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 924G, 924GZ, AP-800C, BG-225B, BG-225C, CB-434C, CB-534C, CB-535B, CP-433C, C...
2008129
SEAL-O-RING
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-534B, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M315, PS-200B, PS-3...
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426C, 428B, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-534B, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M315, PS-200B, PS-3...
1410837
SEAL-O-RING
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M...
3054, 3056, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, M312, M...
1310456
SEAL-O-RING
3054, 3054B, 3056, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, ...
3054, 3054B, 3056, 307, 312, 315, 317, 416B, 416C, 426B, 426C, 428C, 436C, 438C, 914G, AP-800C, BG-225B, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, IT14G, ...
1416188
SEAL
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-7...
3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-7...
1407515
SEAL-O-RING
3034, 3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 906, 908, 924G, 924GZ, 930G, AP-655C, AP...
3034, 3054, 3054B, 3056, 3056E, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564, 574B, 906, 908, 924G, 924GZ, 930G, AP-655C, AP...