1961496 SEAL Caterpillar parts
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
Rating:
Alternative (cross code) number:
CA1961496
196-1496
1961496
CA1961496
196-1496
1961496
Weight: 0.13 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compatible equipment models: 1961496:
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the engine coolant into a suitable container for storage or for disposal. Drain the coolant to a level that is below the water temperature regulator. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g00860997
Loosen clamp (2) and disconnect hose (1) from cover (3) .
Illustration 2 g00861004
Remove bolts (4) .
Remove cover (3) .
Illustration 3 g01140925
Remove water temperature regulator (5) and gasket (6) .Installation Procedure
Illustration 4 g01140925
Install a new gasket (6). Install water temperature regulator (5) .
Illustration 5 g00861004
Position cover (3) .
Install bolt (4) .
Illustration 6 g00860997
Connect hose (1) to cover (3) .
Tighten clamp (2) .
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change"and Operation and Maintenance Manual, "Capacities (Refill)".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the engine coolant into a suitable container for storage or for disposal. Drain the coolant to a level that is below the water temperature regulator. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g00860997
Loosen clamp (2) and disconnect hose (1) from cover (3) .
Illustration 2 g00861004
Remove bolts (4) .
Remove cover (3) .
Illustration 3 g01140925
Remove water temperature regulator (5) and gasket (6) .Installation Procedure
Illustration 4 g01140925
Install a new gasket (6). Install water temperature regulator (5) .
Illustration 5 g00861004
Position cover (3) .
Install bolt (4) .
Illustration 6 g00860997
Connect hose (1) to cover (3) .
Tighten clamp (2) .
Fill the cooling system to the correct level. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change"and Operation and Maintenance Manual, "Capacities (Refill)".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 345C, 345C L, 345C MH, 385C L, W345C MH
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
325B, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C MH, 345D L, 349D L, 349E, 349E ...
325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
2141237
SEAL
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
2141239
SEAL
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
2141236
SEAL
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
1133467
SEAL-O-RING
308C, 308D, 312E, 312E L, 314C, 314D CR, 314D LCR, 315, 315B, 315B FM L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322B, 323E L, 324E, 324E L, 324E LN, 325B, 328D LCR, ...
308C, 308D, 312E, 312E L, 314C, 314D CR, 314D LCR, 315, 315B, 315B FM L, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322B, 323E L, 324E, 324E L, 324E LN, 325B, 328D LCR, ...
2070234
SEAL
308C, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
2070107
SEAL-O-RING
308C, 314C, 321C
308C, 314C, 321C
2375586
SEAL
312D L, 312E L, 314C, 315D L, 316E L, 318E L, 319D L, 319D LN, 320C, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320E L, 321C, 321D LCR, 323D LN, 324D, 324D FM, 324D FM LL, 324D L, 324E L, 324E LN, 325 ...
312D L, 312E L, 314C, 315D L, 316E L, 318E L, 319D L, 319D LN, 320C, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320E L, 321C, 321D LCR, 323D LN, 324D, 324D FM, 324D FM LL, 324D L, 324E L, 324E LN, 325 ...
2487910
SEAL
314C
314C
2021761
SEAL
314C
314C
306, 311B, 311D LRR, 311F LRR, 312B, 312C, 312D, 312D L, 312E, 312E L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D L...
311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR
1961497
SEAL
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 314C, 314D LCR, 321C, 321D LCR, 325C, 328D LCR