1992141 SEAL Caterpillar parts
302.5C, 303, 304
Rating:
Alternative (cross code) number:
CA1992141
199-2141
1992141
CA1992141
199-2141
1992141
Weight: 0.01 pounds 0 kg.
MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
outdoorm Lower Front Quarter Panel Bed Section for Ford for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 Ii-Pair
outdoorm Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and performance
outdoorm Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent Performance || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and performance
AINNUDSE Lower Front Quarter Panel Bed Section for Ford for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 Ii-Pair
AINNUDSE Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and
AINNUDSE Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and
ZPLKKYGR Lower Front Quarter Panel Bed Section for Ford for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 Ii-Pair
ZPLKKYGR Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and
ZPLKKYGR Fitment:for Ford,for Bronco II XLS 1984-1985 & Base 1984-1986 & Eddie Bauer/XLT 1984-1990 & XL 1987-1990 & XL Sport 1988-1990 & XLT Plus 1989-1990 || Location: Left,Right,Front || Part Number:968455,1992-142,1992-141 L,1992-141 || Built Standard: Care to Meet Industry Standards for Quality Control, Ensuring Reliable and Consistent || Material: the item is crafted using materials, carefully selected for their strength and durability, ensuring excellent quality and
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the rockershaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine should be mounted on a suitable stand and placed in the inverted position.
Illustration 1 g01340531
Typical example
Remove thrust washer (1) from the cylinder block. Do not remove dowel (2) from the cylinder block unless the dowel is damaged. Note: The thrust washer can have one or two slots (X).
Illustration 2 g01340532
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (3) from the cylinder block.
If necessary, remove key (4) from camshaft (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the camshaft and the thrust washer. Inspect the camshaft and the thrust washer for wear and for damage. Refer to Specifications, "Camshaft" for more information. Replace any worn components or any damaged components.
Clean the camshaft bearing in the cylinder block. Inspect the camshaft bearing for wear and for damage. Refer to Specifications, "Camshaft Bearings" for more information. If necessary, replace the camshaft bearing. Refer to Disassembly and Assembly, "Camshaft Bearing - Remove and Install".
It is strongly recommended that all lifters should be replaced when a new camshaft is installed.
Inspect the lifters for wear and for damage. Refer to Specifications, "Lifter Group" for more information. Replace any worn lifters or any damaged lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and install".
Illustration 3 g01340531
Typical example
If necessary, install a new key (4) into camshaft (3).
Lubricate the bearing surfaces of camshaft (3) and lubricate the lobes of the camshaft with clean engine oil.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully install camshaft (3) into the cylinder block.
Illustration 4 g01167327
Typical example
Lubricate the thrust washer with clean engine oil. Align slot (X) in thrust washer (1) with dowel (2) in the cylinder block. Install thrust washer (1) into the recess in the cylinder block. Note: The thrust washer can have one or two slots (X).End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the rockershaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Install".
Start By:
Remove the rockershaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine should be mounted on a suitable stand and placed in the inverted position.
Illustration 1 g01340531
Typical example
Remove thrust washer (1) from the cylinder block. Do not remove dowel (2) from the cylinder block unless the dowel is damaged. Note: The thrust washer can have one or two slots (X).
Illustration 2 g01340532
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (3) from the cylinder block.
If necessary, remove key (4) from camshaft (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the camshaft and the thrust washer. Inspect the camshaft and the thrust washer for wear and for damage. Refer to Specifications, "Camshaft" for more information. Replace any worn components or any damaged components.
Clean the camshaft bearing in the cylinder block. Inspect the camshaft bearing for wear and for damage. Refer to Specifications, "Camshaft Bearings" for more information. If necessary, replace the camshaft bearing. Refer to Disassembly and Assembly, "Camshaft Bearing - Remove and Install".
It is strongly recommended that all lifters should be replaced when a new camshaft is installed.
Inspect the lifters for wear and for damage. Refer to Specifications, "Lifter Group" for more information. Replace any worn lifters or any damaged lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and install".
Illustration 3 g01340531
Typical example
If necessary, install a new key (4) into camshaft (3).
Lubricate the bearing surfaces of camshaft (3) and lubricate the lobes of the camshaft with clean engine oil.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully install camshaft (3) into the cylinder block.
Illustration 4 g01167327
Typical example
Lubricate the thrust washer with clean engine oil. Align slot (X) in thrust washer (1) with dowel (2) in the cylinder block. Install thrust washer (1) into the recess in the cylinder block. Note: The thrust washer can have one or two slots (X).End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the rockershaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Install".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 1...
1190T, 120B, 120G, 120H, 127, 1290T, 12E, 12G, 130G, 140, 140B, 140G, 140H, 141, 14G, 14H NA, 14M, 153, 16, 160G, 16M, 173B, 183B, 191, 215, 215B, 215C, 227, 2391, 245, 245B, 2491, 24H, 24M, 301.6C, 3...
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14G, 160G, 16G, 214, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 2384C, 242B, 242B3, 247, 247B, 247B3, 248, 2484C, 252B, 252B3,...
140M, 14M, 160M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 301.5, 301.6C, 302.5C, 303.5, 30...
216, 236, 2384C, 247, 2484C, 267, 303, 303.5, 303.5C, 303.5D, 303.5E, 3034, 303C CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C,...
302.5C, 420D, 428D, 430D, 432D, 434E, 438D, 442D, 908H, 908H2
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 3...
303.5C, 303.5D, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 311, 311B, 311D LRR, 311F LRR, 312, 312B, 312C, 312...
2384C, 2484C, 302.5, 303, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B L, 315C, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D,...
2384C, 2484C, 303, 307, 307C, 308C, 308E, 308E CR, 308E SR, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, 31...
302.5, 302.5C, 303E CR, 311C, 312C, 312C L, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, ...
303, 304, 304.5, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D R...
0960037
SEAL-O-RING
304.5
304.5
1931377
SEAL-O-RING
304.5
304.5
1931375
SEAL-O-RING
304.5
304.5
1931397
SEAL-O-RING
304.5
304.5
1931395
SEAL-O-RING
304.5
304.5
1930793
SEAL-DUST
304.5
304.5
2068940
SEAL
303
303
2068939
SEAL
303
303
301.6C, 302.5C, 303, 304, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D...
1992209
SEAL-OIL
302.5C, 303, 304
302.5C, 303, 304
1992146
SEAL-OIL
302.5C, 303, 304
302.5C, 303, 304