1992209 SEAL-OIL Caterpillar parts
302.5C, 303, 304
Rating:
Alternative (cross code) number:
CA1992209
199-2209
1992209
CA1992209
199-2209
1992209
Weight: 0.02 pounds 0 kg.
MINI HYD EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2021-09-16
2019-11-21
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the electronic control module. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install".
Illustration 1 g01342045
Typical example
Follow Steps 1.a through 1.c in order to disconnect engine wiring harness (2) .
Slide locking tab (4) into the unlocked position.
Disconnect harness assembly (2) from fuel pressure sensor (3).
Cut cable straps (1) and (5). Position harness assembly (2) so that the harness assembly is clear of mounting bracket (8).
Disconnect wire (7) for the glow plugs. Remove terminal insulator (6) from mounting bracket (8). Refer to Disassembly and Assembly, "Glow Plugs - Remove and Install" for the correct procedure.
Illustration 2 g01342046
Typical example
Remove bolts (9) from fuel manifold (10).
Loosen bolts (11) that secure mounting bracket (8) to the inlet manifold.
Illustration 3 g01342051
Typical example
Remove bolts (12) that secure mounting bracket (8) to the cylinder block.
Slide mounting bracket (8) horizontally away from the cylinder block in order to remove the mounting bracket. Note: Avoid placing any strain on the fuel injection lines when the fuel manifold is not supported by the mounting bracket.Installation Procedure
Ensure that the mounting bracket for the electronic control module is clean and free from damage. If the mounting bracket is damaged, replace the bracket.
Illustration 4 g01342051
Typical example
Illustration 5 g01342046
Typical example
Position mounting bracket (8) against the cylinder block. Ensure that the two slots in the top face of the mounting bracket are aligned with bolts (11). Slide the mounting bracket into position against the cylinder block.
Install bolts (12) finger tight.
Install bolts (9) that secure fuel manifold (10) to mounting bracket (8) finger tight. Note: Ensure that the fuel manifold is seated against the mounting bracket before bolts (9) are tightened. Ensure that the fuel injection lines are not stressed when the bolts are tightened.
Tighten bolts (11) to a torque of 22 N m (16 lb ft).
Tighten bolts (12) to a torque of 22 N m (16 lb ft). Tighten bolts (9) to a torque of 22 N m (16 lb ft).
Illustration 6 g01342045
Typical example
Install terminal insulator (6) to mounting bracket (8). Connect wire (7) to the terminal insulator. Refer to Disassembly and Assembly, "Glow Plugs - Remove and Install" for the correct procedure.
Follow Steps 1.b through 1.c in order to connect engine wiring harness (2).
Connect harness assembly (2) to fuel pressure sensor (3).
Slide locking tab (4) into the locked position.
Position harness assembly (2) onto mounting bracket (8). Use new cable straps (1) and (5) in order to secure the harness assembly. End By:
Install the electronic control module. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install".
Start By:
Remove the electronic control module. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install".
Illustration 1 g01342045
Typical example
Follow Steps 1.a through 1.c in order to disconnect engine wiring harness (2) .
Slide locking tab (4) into the unlocked position.
Disconnect harness assembly (2) from fuel pressure sensor (3).
Cut cable straps (1) and (5). Position harness assembly (2) so that the harness assembly is clear of mounting bracket (8).
Disconnect wire (7) for the glow plugs. Remove terminal insulator (6) from mounting bracket (8). Refer to Disassembly and Assembly, "Glow Plugs - Remove and Install" for the correct procedure.
Illustration 2 g01342046
Typical example
Remove bolts (9) from fuel manifold (10).
Loosen bolts (11) that secure mounting bracket (8) to the inlet manifold.
Illustration 3 g01342051
Typical example
Remove bolts (12) that secure mounting bracket (8) to the cylinder block.
Slide mounting bracket (8) horizontally away from the cylinder block in order to remove the mounting bracket. Note: Avoid placing any strain on the fuel injection lines when the fuel manifold is not supported by the mounting bracket.Installation Procedure
Ensure that the mounting bracket for the electronic control module is clean and free from damage. If the mounting bracket is damaged, replace the bracket.
Illustration 4 g01342051
Typical example
Illustration 5 g01342046
Typical example
Position mounting bracket (8) against the cylinder block. Ensure that the two slots in the top face of the mounting bracket are aligned with bolts (11). Slide the mounting bracket into position against the cylinder block.
Install bolts (12) finger tight.
Install bolts (9) that secure fuel manifold (10) to mounting bracket (8) finger tight. Note: Ensure that the fuel manifold is seated against the mounting bracket before bolts (9) are tightened. Ensure that the fuel injection lines are not stressed when the bolts are tightened.
Tighten bolts (11) to a torque of 22 N m (16 lb ft).
Tighten bolts (12) to a torque of 22 N m (16 lb ft). Tighten bolts (9) to a torque of 22 N m (16 lb ft).
Illustration 6 g01342045
Typical example
Install terminal insulator (6) to mounting bracket (8). Connect wire (7) to the terminal insulator. Refer to Disassembly and Assembly, "Glow Plugs - Remove and Install" for the correct procedure.
Follow Steps 1.b through 1.c in order to connect engine wiring harness (2).
Connect harness assembly (2) to fuel pressure sensor (3).
Slide locking tab (4) into the locked position.
Position harness assembly (2) onto mounting bracket (8). Use new cable straps (1) and (5) in order to secure the harness assembly. End By:
Install the electronic control module. Refer to Disassembly and Assembly, "Electronic Control Module - Remove and Install".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 1...
1190T, 120B, 120G, 120H, 127, 1290T, 12E, 12G, 130G, 140, 140B, 140G, 140H, 141, 14G, 14H NA, 14M, 153, 16, 160G, 16M, 173B, 183B, 191, 215, 215B, 215C, 227, 2391, 245, 245B, 2491, 24H, 24M, 301.6C, 3...
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14G, 160G, 16G, 214, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 2384C, 242B, 242B3, 247, 247B, 247B3, 248, 2484C, 252B, 252B3,...
140M, 14M, 160M, 216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 301.5, 301.6C, 302.5C, 303.5, 30...
216, 236, 2384C, 247, 2484C, 267, 303, 303.5, 303.5C, 303.5D, 303.5E, 3034, 303C CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E, 307, 307B, 307C,...
302.5C, 420D, 428D, 430D, 432D, 434E, 438D, 442D, 908H, 908H2
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 3...
303.5C, 303.5D, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307, 307B, 307C, 307D, 308C, 308D, 308E, 311, 311B, 311D LRR, 311F LRR, 312, 312B, 312C, 312...
2384C, 2484C, 302.5, 303, 311C, 311D LRR, 311F LRR, 312B L, 312C, 312C L, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B L, 315C, 317B LN, 318B, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D,...
2384C, 2484C, 303, 307, 307C, 308C, 308E, 308E CR, 308E SR, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C L, 312D, 312D L, 312E, 312E L, 313B, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, 31...
302.5, 302.5C, 303E CR, 311C, 312C, 312C L, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, ...
303, 304, 304.5, 304C CR, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D R...
1992146
SEAL-OIL
302.5C, 303, 304
302.5C, 303, 304
1992141
SEAL
302.5C, 303, 304
302.5C, 303, 304
0960037
SEAL-O-RING
304.5
304.5
1931377
SEAL-O-RING
304.5
304.5
1931375
SEAL-O-RING
304.5
304.5
1931397
SEAL-O-RING
304.5
304.5
2068940
SEAL
303
303
2068939
SEAL
303
303
301.6C, 302.5C, 303, 304, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D...