SEAL 1H8182 - Caterpillar

Illustration 1 g02770236
(8) 269-1084 Control Valve Gp (Lift)
(9) 269-1085 Control Valve Gp (Angle)
(10) 304-1139 Control Valve Gp (Tilt)
(11) 326-8749 Control Valve Gp (Auxiliary)
Table 1
Specification for 323-8150 Bank Valve Gp
Item Qty Part Specification Description
1 - - Tighten the winch port to 32 to 38 N m (24 to 28 lb ft).
2 8 - Tighten the air vent valve to 1.5 to 2.5 N m (13.3 to 22.1 lb in).
3 - - Tighten the relief valve port to 49 to 59 N m (36 to 44 lb ft).
Tighten the adjusting nut of the relief valve to 6.9 to 8.8 N m (61.0 to 78.0 lb in)
4 - - Tighten the main relief valve port to 49 to 59 N m (36 to 44 lb ft).
Tighten the adjusting nut of the main relief valve to 6.9 to 8.8 N m (61.0 to 78.0 lb in)
5 7 - Tighten the make up valve to 39 to 49 N m (29 to 36 lb ft).
6 16 - Tighten the bolt to 11 to 13 N m (97 to 115 lb in).
7 8 - Tighten the jam nut to 6.9 to 8.8 N m (61.0 to 78.0 lb in).
12 4 - Tighten the air vent valve to 2.5 to 3.4 N m (22.1 to 30.0 lb in).
13 - - Tighten the load sensing port to 32 to 38 N m (24 to 28 lb ft).
14 18 - Tighten the bolt to 5.9 to 7.8 N m (52.2 to 69.0 lb in).
Illustration 2 g02780943
Table 2
Specification for 323-8150 Bank Valve Gp
Item Qty Part Specification Description
15 4 8T-4133 Nut Tighten the nut to 39 to 44 N m (29 to 32 lb ft)
16 4 - Tighten the screw to 15 to 20 N m (133 to 177 lb in)
17 3 - Tighten the plug to 69 to 78 N m (51 to 58 lb ft)