SEAL 1S1164 - Caterpillar

Electric Power Generation3512 GEN SET (S/N: ZAF1-UP)3512B GENSET (S/N: ZAH1-UP; ZAJ1-UP)3516C GEN SET (S/N: SBK1-UP)C175-16 GEN SET (S/N: WYB1-UP)C27 PET GEN SET (S/N: EGG1-UP; R8W1-UP)Engine3512 (S/N: YBA1-UP; YAK1-UP; YAX1-UP)3512B (S/N: YBB1-UP; YBC1-UP; YAM1-UP; YAN1-UP; YAY1-UP; YAZ1-UP)3512C (S/N: YBD1-UP; SBG1-UP; LYP1-UP)3516 (S/N: YAL1-UP; ZAL1-UP; ZBL1-UP; YAS1-UP; YBS1-UP)3516B (S/N: YAP1-UP; ZAP1-UP; ZBP1-UP; PBR1-UP; YAR1-UP; ZAR1-UP; ZBR1-UP; YAT1-UP; YBT1-UP; YAW1-UP; YBW1-UP)3516C (S/N: SBJ1-UP; SFJ1-UP; SEK1-UP)C175-20 (S/N: BXR1-UP)Generator SetC27 GEN SET (S/N: 2A31-UP; DWB1-UP; T4Z1-UP)C32 GEN SET (S/N: NRC1-UP; JSJ1-UP; JAZ1-UP)Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is found, use the solution that is identified below.Problem
The EMCP 4.1 through EMCP 4.4 stops showing bearing and stator temperatures coming from the RTD module when 455-5131 EMCP Software Gp is installed.Solution
Caterpillar® is aware of the problem. Document a Product Service Report (PSR) on CAN 1 and CAN 2. Contact the Dealer Solution Network (DSN) for further assistance.