1S7462 SEAL-O-RING Caterpillar parts
14E, 45, 518, 55, 583K, 613, 621, 621B, 621E, 621F, 621G, 623, 623B, 623E, 623F, 623G, 627, 627B, 627E, 627F, 627G, 631C, 631D, 631E, 631G, 633C, 633D, 633E II, 637, 637D, 637E, 637G, 639D, 65, 650B, ...
Rating:
Alternative (cross code) number:
CA1S7462
1S-7462
1S7462
CA1S7462
1S-7462
1S7462
Weight: 0.01 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
2.62
mm
DASH SIZE
120
ID
25.07
mm
MATERIAL
Silicone (VMQ) Rubber - 70 Duro
OD
0
mm
CHALLENGER, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$11.67
08 Jul 2023
US: Florida-Parts-Z
1S7462 - Seal-O-Ring for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$7.00
20 Apr 2019
CATERPILLAR 1S7462 SEAL O RING NEW
$6.90
18 May 2022
0.13[0.06] Pounds
US: ProperBuy
1S7462 Seal O Ring Fits Caterpillar 35 45 55 65C 65D 65E 75C 75D 75E 85C 85D 85E
TCP Warranty
TCP Warranty
Number on catalog scheme:
For full view, you need register
Information:
Specifications
Table 1
Parameter Value
Fuel Manifold Pressure 415 to 450 kPa (60 to 65 psi)
Fuel Transfer Pump Pressure 415 to 450 kPa (60 to 65 psi) Introduction
Use this procedure to check the regulated fuel pressure.Required Tools
Table 2
Required Tools
Qty Part Number
1 1U-5470 Engine Pressure Gp
Illustration 1 g03779828
1U-5470 Engine Pressure Group
(1) Pressure indicators
(2) Zero adjustment screw
(3) Pressure indicator
(4) Pressure tap
(5) Pressure indicator This tool group has an indicator that is used to read the pressure in the fuel manifolds. The Special Instruction, SEHS8907 is with the tool group.Test Preparation - Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 2 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine.
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2. Test Preparation - Fuel Transfer Pump Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 3 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine.
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2. Test Procedure - Transfer Pump and Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Turn off the engine.
Illustration 4 g03779826
Fuel transfer fuel lines and fuel filter fuel lines.
(8) Fuel inlet line to priming pump
(9) Plug
(10) Line from fuel filters to fuel manifolds (filtered fuel)
(11) Fuel priming pump adapter
(12) Fuel line from transfer pump
(13) Fuel filters
Slowly loosen plug (9). Refer to Illustration 4.
Connect the 1U-5470 Engine Pressure Gp into the pressure tap (9).
Start the engine.
Operate the engine at rated speed and load.
Note the pressure readings. If, the
Table 1
Parameter Value
Fuel Manifold Pressure 415 to 450 kPa (60 to 65 psi)
Fuel Transfer Pump Pressure 415 to 450 kPa (60 to 65 psi) Introduction
Use this procedure to check the regulated fuel pressure.Required Tools
Table 2
Required Tools
Qty Part Number
1 1U-5470 Engine Pressure Gp
Illustration 1 g03779828
1U-5470 Engine Pressure Group
(1) Pressure indicators
(2) Zero adjustment screw
(3) Pressure indicator
(4) Pressure tap
(5) Pressure indicator This tool group has an indicator that is used to read the pressure in the fuel manifolds. The Special Instruction, SEHS8907 is with the tool group.Test Preparation - Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 2 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine.
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2. Test Preparation - Fuel Transfer Pump Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Illustration 3 g00284797
Fuel manifold and lines
(6) Fuel supply line to cylinder head
(7) Fuel manifold
Turn off the engine.
Install a tee fitting into fuel line (6). Connect the 1U-5470 Engine Pressure Gp to the tee fitting. Refer to Illustration 2. Test Procedure - Transfer Pump and Fuel Manifold Pressure
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Use a suitable container to catch any fuel that might spill. Clean up any spilled fuel immediately.
Turn off the engine.
Illustration 4 g03779826
Fuel transfer fuel lines and fuel filter fuel lines.
(8) Fuel inlet line to priming pump
(9) Plug
(10) Line from fuel filters to fuel manifolds (filtered fuel)
(11) Fuel priming pump adapter
(12) Fuel line from transfer pump
(13) Fuel filters
Slowly loosen plug (9). Refer to Illustration 4.
Connect the 1U-5470 Engine Pressure Gp into the pressure tap (9).
Start the engine.
Operate the engine at rated speed and load.
Note the pressure readings. If, the
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
16, 772, 777, D10
773B
768C, 769C
773B
515, 518, 518C, 525, 525B, 535B
12E, D8H, D8K
D7G, D8H, D8K
D8H
D8H
14E, 16
14E, 16
120B, 12E, 12F, 140, 140B, 14E
120, 12E, 12F, 14E, 16G, 16H, 16H NA, 16M, 183, 184, 225, 235, 235C, 235D, 245, 245B, 245D, 304C CR, 305D CR, 305E, 318C, 3192, 319C, 320C, 320C FM, 320C L, 321C, 322C, 322C FM, 324D, 324D FM, 324D FM...
35, 45, 508, 55, 578, D7H, D8N
45, 55, 769C, 814F, 814F II, 816F, 950G, 966F, 966F II, 966G, 966G II, 966H, 970F, 972G, 972G II, 972H, D35C, D7F
14E, 16, 1693, 16G, 183B, 245, 3406B, 3406C, 35, 375, 45, 5080, 55, 572R, 572R II, 583K, 621, 621B, 621E, 621F, 623E, 627B, 627F, 641, 641B, 65, 650B, 651, 657, 657B, 65C, 65E, 666, 75, 75C, 75D, 75E,...
1585999
SEAL-O-RING
35, 45, 55
35, 45, 55
1585998
SEAL-O-RING
35, 45, 55
35, 45, 55
35, 45, 55
35, 45, 55, 574, D350E II, D400E II
1216718
SEAL-CLIP
35, 45, 55
35, 45, 55
1296650
SEAL
35, 45, 55
35, 45, 55
1140968
SEAL
45, 55
45, 55
12E, 245, 307D, 308D, 308E, 308E CR, 308E SR, 311, 312, 315, 317, 320 L, 325, 325 L, 330, 35, 45, 5110B, 515, 517, 518, 518C, 525, 525B, 525C, 527, 528, 528B, 530B, 535B, 535C, 545, 545C, 55, 561D, 57...