SEAL 2010051 - Caterpillar

Introduction
This Special Instruction provides information on installing the literature compartment that is used with the Comfort Series II seat in the H-series machine.Do not perform any of the procedures or order any parts until you have read the information in this publication. Required Parts
Table 1
Required Parts    
Part Number     Part Name     Quantity    
178-7907     Holder     1    
173-2052     Retainer     1    
4B-4863     Washers     4    
5P-7957     Lanyard     1    
5P-5637     Seal     1    
8T-7565     Pop Rivets     4    Installation
Illustration 1 g01418361
(1) 178-7907 Holder The book bag (1) will now be located to the right and rear of the seat that is shown in Illustration 1.
Illustration 2 g01418366
(2) 5P-7957 Lanyard (3) 173-2052 Retainer The retainer (3) reinforces attachment of the book bag to the cab.
Illustration 3 g01418379
(4) 5.0 0.3 mm (0.20 0.012 inch) (A) 171.0 3.0 mm (6.73 0.12 inch) (B) 112.0 3.0 mm (4.41 0.12 inch) (C) 53.0 3.0 mm (2.09 0.12 inch) (D) 1.0 3.0 mm (0.039 0.12 inch) (E) 62.0 3.0 mm (2.44 0.12 inch)
Locate the holes for the rivets from the the hole that is marked (X). The holes are shown in Illustration 4.
Drill four holes that are 5.0 mm (0.20 inch) that is shown in Illustration 3.Note: The 173-2052 Retainer can be used as a template in order to drill the four holes.Note: Use hole (X) for locating the dimensions.
Attach the cable of the lanyard to the first rivet on the right.
Illustration 4 g01418445
Rear view of panel (5) 4B-4863 Washer
Attach the retainer to the book bag.
Attach the book bag to the cab with 8T-7565 Pop Rivets . Attach the 5P-5637 Seal on top of the rivets on the rear of the panel in order to prevent wire abrasion.