SEAL DUST 2012266 - Caterpillar

1. Open engine access door located on the right side of the machine.2. Remove four bolts, and remove right hand panel assembly located under the engine access door.3. Turn the valve on the bottom of the air tank to the "OPEN" position, and release the air pressure from the air tank. 4. Disconnect hose assembly (1) and (2) from the air compressor. 5. Remove nut (4) and clip (3) from each end of the air tank that hold the battery cable to the tank. 6. Disconnect tube assembly (5) from the air tank. 7. Put tooling (A) or a suitable jack in position under air tank (6), and fasten the air tank to the jack as shown.8. Remove four bolts (7), and lower air tank (6) from the machine. 9. Remove relief valve (8) from the air tank if necessary.10. Remove hose assembly (9) and outlet check valve (10) from the air tank if necessary.Install Air Tank
1. Install outlet check valve (3) and hose assembly (2) on the air tank if they were removed.2. Install relief valve (1) on the air tank if it was removed. 3. Fasten air tank (4) on tooling (A) or a suitable jack as shown.4. Use tooling (A), and put air tank (4) in position on the machine, and install the four bolts that hold it. 5. Connect tube assembly (5) to the air tank. 6. Install clip (6) and nut (7) on each end of the air tank that hold the battery cable to the tank. 7. Connect hose assembly (8) and (9) to the air compressor.8. Turn the valve on the bottom of the air tank to the "CLOSED" position.9. Put the right hand panel assembly in position on the machine, and install the four bolts that hold it in place.