SEAL KIT- 2099864 - Caterpillar

STIC Control
The STIC Control controls the following machine functions: Steering, Speed Control and Direction Control.STIC Steering Control
Note: The steering frame lock must be in the unlocked position in order to steer the machine.Left Turn - Move the STIC steering control to the left in order to steer the machine to the left. Moving the STIC steering control farther to the left will cause the machine to turn more quickly to the left.Right Turn - Move the STIC steering control to the right in order to steer the machine to the right. Moving the STIC steering control farther to the right will cause the machine to turn more quickly to the right.Note: When you release the STIC steering control, the control will return to the center position. The machine will maintain the current travel direction.Upshift Switch (35)
Push the upshift switch in order to shift the machine into the next highest speed. The active speed range will be shown on the speedometer:
"1" indicates first speed.
"2" indicates second speed.
"3" indicates third speed.Downshift Switch (36)
Push the downshift switch in order to shift the machine into the next lowest speed. The active speed range will be shown on the speedometer.Note: When the parking brake is engaged, the machine can only be shifted into second speed or into third speed.Transmission Direction Control Switch (38)
FORWARD - Adjust the switch to "F". This will enable the machine to move in a forward direction. "F" will be displayed on the speedometer.NEUTRAL - Adjust the switch to "N". This will disengage the transmission. "N" will be displayed on the speedometer.REVERSE - Adjust the switch to "R". This will enable the machine to move in a reverse direction. "R" will be displayed on the speedometer.STIC Control Lock (39)
Move the lock lever to the left and to the rear in order to lock the STIC steering and transmission controls. Return the lock lever to the original position in order to unlock the STIC steering and transmission controls.Adjustment Knobs (37, 40)
Adjustment Knob for Console - Push down knob (37) in order to slide the STIC control console forward or backward. Release the knob in order to lock the console into position.Armrest Adjustment Knobs - Turn knobs (40) counterclockwise in order to loosen the armrest. Pull up on the armrest in order to adjust the armrest to the desired height. Turn knobs (40) clockwise in order to tighten the armrest at the desired height.The angle of the armrests can be adjusted by simply moving the front of the armrests up and down.Front Panel
Illustration 6 g01053442
(41) Parking Brake Knob (42) Left Brake Pedal (43) Right Brake Pedal (44) Throttle ControlParking Brake (41)
Parking Brake - Engage the parking brake after the machine has been stopped. Use the parking brake if the service brakes fail to stop the machine. Pull the knob outward in order to apply the parking brake. Push the knob inward in order to release the parking brake.Left Brake Pedal (42)
The left brake pedal should not be used to control the speed of