2130509 SEAL-LIP TYPE Caterpillar parts
RM-300, RM-350B, RM-500
Rating:
Alternative (cross code) number:
CA2130509
213-0509
2130509
CA2130509
213-0509
2130509
Weight: 0.03 pounds 0 kg.
Information:
AXIAL WIDTH
8
mm
BORE DIAMETER
53.94
mm
MATERIAL
Nitrile Rubber (NBR) - 75 Duro
SEAL OD
54.08
mm
SHAFT OD
38.1
mm
PRESSURE RATING
35 KPA
ROTATING DIRECTION
BI
RECLAIMER MIXER,
Number on catalog scheme:
21
For full view, you need register
Information:
Installation Procedure
Make sure that the mating surfaces of the travel motor and the counterbalance valve are thoroughly clean.
Check the condition of the O-ring seals that are used between the travel motor and the counterbalance valve. If the O-ring seals are damaged, use new parts for replacement.
Install the O-ring seals in the travel motor.
Illustration 1 g00483963
Position counterbalance valve (3) on the travel motor. Install bolts (4). Tighten bolts (4) to a torque of 80 8 N m (60 6 lb ft).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Check the condition of the O-ring seals that are used in the ends of hose assemblies (5). If the O-ring seals are damaged, use new parts for replacement.
Connect hose assemblies (5) to the counterbalance valve. Tighten hose assemblies (5) to a torque of 80 7 N m (60 5 lb ft).
Fill the hydraulic oil tank with hydraulic oil to the correct level. Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the proper filling procedure and the proper levels for the hydraulic system.
Start the machine and check for leaks. Check the operation of the travel motors.
Illustration 2 g00483962
Install cover (2), the washers, and bolts (1). Tighten bolts (1) to a torque of 130 10 N m (95 7 lb ft).
Make sure that the mating surfaces of the travel motor and the counterbalance valve are thoroughly clean.
Check the condition of the O-ring seals that are used between the travel motor and the counterbalance valve. If the O-ring seals are damaged, use new parts for replacement.
Install the O-ring seals in the travel motor.
Illustration 1 g00483963
Position counterbalance valve (3) on the travel motor. Install bolts (4). Tighten bolts (4) to a torque of 80 8 N m (60 6 lb ft).
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Check the condition of the O-ring seals that are used in the ends of hose assemblies (5). If the O-ring seals are damaged, use new parts for replacement.
Connect hose assemblies (5) to the counterbalance valve. Tighten hose assemblies (5) to a torque of 80 7 N m (60 5 lb ft).
Fill the hydraulic oil tank with hydraulic oil to the correct level. Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities" for the proper filling procedure and the proper levels for the hydraulic system.
Start the machine and check for leaks. Check the operation of the travel motors.
Illustration 2 g00483962
Install cover (2), the washers, and bolts (1). Tighten bolts (1) to a torque of 130 10 N m (95 7 lb ft).
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 140G, 140H, 140H NA, 143H, 14H, 160H, 163H, 1673, 1673B, 1673C, 16H, 214, 235B, 3114, 3116, 3126, 3126B, 3176, 3176B, 3176C, 3196, 330, 330 L, 3304, 3306, 3...
120, 120H, 120H ES, 120H NA, 120K, 12E, 12F, 12H, 12K, 135H, 135H NA, 140K, 140K 2, 14E, 16, 160K, 1673C, 1693, 173B, 183B, 214B, 225, 227, 235, 235B, 245, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 225, 235, 235B, 245, 259B3, 259D, 279C, 279C2, 279D, 289C, 28...
14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 24H, 24M, 324D FM LL, 325D FM, 325D FM LL, 330D FM, 416B, 416C, 416E, 416F, 420E, 420F, 426C, 428B, 428C, 436C, 438C, 530B, 568 FM LL, 621E, 621F, 621G, 621H, ...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 1290T, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, 14H, 14H NA, 14M,...
120H, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16G, 1...
345C, 345C L, 345C MH, 365B L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 45, 5090B, 5110B, 55, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 770G, 770G OEM, 772G, 772G OEM, 824C,...
140H, 143H, 14H, 160H, 163H, 16G, 16H, 16H NA, 24H, 2864C, 3176, 3176B, 3176C, 3196, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329...
120G, 12G, 12H, 130G, 140G, 160G, 3034, 3126, 3126B, 3126E, 320 L, 320B, 320B U, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 330C, 330C FM, 330C L, 330C MH, 34...
16G, 16H NA, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 375, 375 L, 5080, 5110B, 578, 583R, 583T, 587R, 587T, 589, 621B, 621E, 621F, 621G, 621H, 6...
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 318C, 319C, 320B, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D ...
16G, 16H NA, 245D, 3126E, 3406B, 3406C, 3406E, 3456, 375, 375 L, 390F L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 793C, 793D, 814B, 824G, 825G, 826C, 826G, 924G, 924GZ, 980C, 9...
2131168
SEAL
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
2141078
SEAL-O-RING
RM-300, RM-350B, RM-500
RM-300, RM-350B, RM-500
2404752
SEAL-LIP TYPE
RM-500
RM-500
3175891
SEAL-LIP TYPE
AP-600D, AP-655D, AP1000E, BG1000E, BG600D, RM-300, RM-500
AP-600D, AP-655D, AP1000E, BG1000E, BG600D, RM-300, RM-500
2603182
SEAL
RM-500
RM-500
3195223
SEAL-LIP TYPE
525D, 535D, 545D, 555D, AP-1055D, AP-600D, AP-655D, AP1055E, AP555E, BG-2455D, BG1055E, BG500E, BG600D, BG655D, PM-201, RM-300, RM-500
525D, 535D, 545D, 555D, AP-1055D, AP-600D, AP-655D, AP1055E, AP555E, BG-2455D, BG1055E, BG500E, BG600D, BG655D, PM-201, RM-300, RM-500
2775567
SEAL-LIP TYPE
RM-300
RM-300
3254691
SEAL GP-DUO-CONE
AP-655C, AP-655D, AP1000E, AP1055E, BG-2455D, BG-260D, BG1000E, BG1055E, BG655D
AP-655C, AP-655D, AP1000E, AP1055E, BG-2455D, BG-260D, BG1000E, BG1055E, BG655D
1396098
SEAL-LIP TYPE
AP-1055D, BG-2455D, BG-260D
AP-1055D, BG-2455D, BG-260D
3288830
SEAL-SQUARE
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
3288829
SEAL-SQUARE
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
3292508
SEAL-FACE
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D
AP-600D, AP1000E, BG-260D, BG1000E, BG500E, BG600D