SEAL-LIP TYPE 2149394 - Caterpillar

Agricultural Tractor AllArticulated Truck AllIntegrated Toolcarrier AllLandfill Compactor AllLoad Haul Dump AllMotor Grader AllOff-Highway Truck/Tractor AllSoil Compactor AllTrack-Type Loader AllTrack-Type Skidder AllTrack-Type Tractor AllUnderground Articulated Truck AllWheel Dozer AllWheel Loader AllWheel Skidder AllWheel Tractor-Scraper AllIntroduction
Table 1
Revision Summary of Changes in SEBF2105
09 Revised to include NPI Prefixes in group effectivity
08 Added new serial number prefixes for New Product Introduction (NPI).
Added 2 part numbers.
Updated copyright date to 2018.
07 Added 5 part numbers.
06 Added 1 part number to Table 7.
Updated copyright date to 2017.
Removed old point of contacts.
Added new point of contact.
Added Summary section to the document.
05 Added 3 part numbers. © 2018 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.Information contained in this document is considered Caterpillar: Confidential Yellow.This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.For technical questions when using this document, work with your Dealer Technical Communicator (TC).To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) Interface.For further information on the equipment needed to perform thermal spray processes, refer to the following publications:
Table 2
Media Number Publication Type & Title
SEBF9236 Special Instruction, "Fundamentals of High Velocity Oxygen Fuel (HVOF) Spray for Reconditioning Components"
SEBF9238 Special Instruction, "Fundamentals of Arc Spray for Reconditioning Components"
SEBF9240 Special Instruction, "Fundamentals of Flame Spray for Reconditioning Components" Canceled Part Numbers and Replaced Part Numbers
This document may not include canceled part numbers and replaced part numbers. Use NPR on SIS for information about canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.Summary
This guideline contains the latest standards of engineering, which will help minimize owning and operating costs. A part is expected to reach the next Planned Component Repair (PCR) if the part meets the specifications within this guideline and the part is intended for a similar application. Use this guideline to determine whether a part should be reused. Do not install a part that is not reusable. During reconditioning, correct any condition that might have caused the original failure.Important Safety Information
Illustration 1 g02139237Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools to perform these functions