SEAL KIT 2159987 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6S-6224 Electric Hydraulic Pump 1
6V-3175 Cylinder Group 1
4C-9634 Threaded Rod 1
9U-6832 Nut 1
6V-4035 Sleeve 1 Start By:
Connect the steering frame lock.
Position the bucket flat on the ground.
Illustration 1 g00391837
Attach a suitable lifting device to bucket tilt link (1). The weight of bucket tilt link (1) is approximately 64 kg (140 lb).
Remove bolt (2), the washer, and the spacer from pin assembly (3).
Illustration 2 g00391840
Use Tooling (A) to remove pin assembly (3).
Illustration 3 g00393015
Place suitable cribbing under the lift arms. Remove bolt (4), the washer, and the spacer from pin assembly (5).
Remove pin assembly (5).
Repeat Steps 5 and 6 to remove the pin assembly from the opposite side of the bucket.
Illustration 4 g00342997
Use a suitable lifting device to remove bucket (6) from the machine. The weight of bucket (6) is approximately 2020 kg (4450 lb).Installation Procedure
Install bucket (6) in the reverse order of the removal.