SEAL 2167638 - Caterpillar

Illustration 1 g01300151
Press the "OK" key in order to select this item. A screen that is similar to the following appears:
Illustration 2 g01300154
Percentage of Power Indicator
Press the increment key in order to change the percentage of power that will drive the valves.The percentage of power will change by one percent when the increment key is pressed.Press the "ESC" key and the "OK" key simultaneously in order to reset the percentage of power to 100%.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Once the system is placed in automatic mode, blade movement may occur.Ensure that all personnel are clear of the blade before you place the system in automatic mode.Personal injury or death from crushing could occur.
Press the up arrow keys (1) on the left side in order to move the left side of the blade up. Press the down arrow keys (1) on the left side in order to move the left side of the blade down.
Press the up arrow keys (1) on the right side in order to move the right side of the blade up. Press the down arrow keys (1) on the right side in order to move the right side of the blade down.
Press the "OK" key in order to return to the "Diagnostics" menu.
Press the menu key in order to return to the guidance mode.Expected Result:The valve is working correctly.Results:
YES - The valve is working correctly.Repair: Repeat the calibration.Make sure that the engine speed is set to high idle. Additionally, make sure that the hydraulics are at normal operating range.If the diagnostic code is still active, contact your Caterpillar dealership.STOP
NO - The valve is not working correctly.Repair: Refer to System operation, Troubleshooting, Testing and Adjusting, "Blade Reaction Time" for more information.STOP