SEAL 2172132 - Caterpillar

Illustration 1 g02721235
Payload... Advanced Configuration > Auto Truck ID screen
A truck is loaded.
The Store button is pressed.
Illustration 2 g02721256
Payload: Truck ID > List of Available Trucks screen
When the Automatic Truck ID feature is enabled, a list of available trucks is displayed. When this feature is disabled, the truck selection list can be manually accessed with:
The "Truck Selection" option from the "Truck Info" submenu of the payload menu
The "Truck Id" button on the left-hand side of AdvisorNote: If Automatic Material ID is enabled, the prompt will be to select the "Material ID" for the previous load after the Store button is pressed. Perform the following to enable or disable the Automatic Truck ID:
Illustration 3 g02721235
Payload... Advanced Configuration > Auto Truck ID screen
Upon entering the Advanced Configuration submenu, use the Up/Left or Down/Right buttons to highlight "Automatic Truck ID". The status will be shown on the screen.
Press the "OK" button. The status will be displayed.
Illustration 4 g02721246
Payload: Truck ID Entry screen
Use the Up/Left or Down/Right buttons to select the desired state.
Press the "OK" button to accept the shown state. Note: If Cat® ET is used to change the status of the Automatic Truck ID feature, a key-cycle is required for the changes to take effect.