2219941 SEAL-O-RING Caterpillar parts
336E H, 336E LH, 906H, 907H, 908H, 966K, 966M XE, 972M XE, C13, C175-16, C175-20
Rating:
Alternative (cross code) number:
CA2219941
221-9941
2219941
CA2219941
221-9941
2219941
Information:
CROSS SECTION DIAMETER
1.78
mm
DASH SIZE
019
ID
20.35
mm
MATERIAL
Fluorocarbon Rubber (FKM) 75 Duro
OD
0
mm
COATING
PTFE
COMPACT WHEEL LOADER, WHEEL LOADER,
Compatible equipment models: 2219941:
Number on catalog scheme:
For full view, you need register
Information:
All Caterpillar Truck EnginesDescription of Change: A nylon seal is now used in place of the former aluminum seal to seal all critical components, such as governors, fuel systems, timing access bolts, etc. The 8S7115 Lockwire is still used. The nylon seal is self-locking and secures the ends of the lockwire. See illustration. The wire in the aluminum seal could be pulled out of the aluminum and reinserted in the seal if the seal was not tightly crimped.
New, nylon self-locking seal for critical areas. No dealer or customer's code is on seals installed at the factory.This nylon seal is installed by Caterpillar at all factories. It is yellow and has CAT imprinted on the seal. See first chart.
Adaptable To: NACD Dealers Only. The new seal(s) and the 8S7115 Lockwire can be used as direct replacements for the former seal and lockwire. No sealing tool is required. Simply put both ends of the 8S7115 Lockwire in both grooves around the arrow-shaped lock, and push the lock firmly inside the seal cavity. See illustration.Part numbers of the former seals and sealing tools are listed in the chart.
Types Of Seals Available And How To Obtain The Seals - Nacd Dealers Only
New nylon seal(s) for field replacements are presently available only to NACD (North American Commercial Division) dealers. The same seal, but a green color with a tab, will later be available directly from Caterpillar to all other dealers, and will be announced in this publication at that time.
The seals are now available in three colors to all NACD dealers.
Each seal, before shipment, is imprinted with an identifying code number by Stoffel Seals Corp. The colors and use of each color are as follows.
Seals MUST be ordered DIRECTLY from Stoffel Seals Corp. by all NACD Caterpillar dealers. Orders from ONLY NACD Caterpillar dealers will be accepted. TEPS dealers and customers are asked to order through their administering Caterpillar dealer.
Dealers and customers should now order the minimum quantity of seals because stocks of the former seals will be scrapped by Caterpillar. Do NOT order more than your immediate needs because this will delay shipments to other dealers.To expedite your orders, please do the following:
... The order must be on a NACD Caterpillar dealer letterhead (not TEPS) listing name, address, color and code for each entry. Each code will be checked against a master code and address list.... Each company named in the order must be identi-fied by category, i.e., Caterpillar dealer, TEPS dealer, or customer.... Specify a CFS-1, Type IV Seal for all orders. If this complete description is not listed, the wrong seal type may be supplied.... The minimum order quantity for each code number is 1,000 seals. Current cost is $58.01/thousand $10.00 surcharge, FOB supplier plant. Price is U.S. $ and subject to change without notice.... Send all orders directly to:Stoffel Seals Corporation
400 High Ave., P.O. Bx 825
Nyack, NY 10960 U.S.A.
Attn: Mr. Joseph Kelley
Telephone: 914-353-3800
New, nylon self-locking seal for critical areas. No dealer or customer's code is on seals installed at the factory.This nylon seal is installed by Caterpillar at all factories. It is yellow and has CAT imprinted on the seal. See first chart.
Adaptable To: NACD Dealers Only. The new seal(s) and the 8S7115 Lockwire can be used as direct replacements for the former seal and lockwire. No sealing tool is required. Simply put both ends of the 8S7115 Lockwire in both grooves around the arrow-shaped lock, and push the lock firmly inside the seal cavity. See illustration.Part numbers of the former seals and sealing tools are listed in the chart.
Types Of Seals Available And How To Obtain The Seals - Nacd Dealers Only
New nylon seal(s) for field replacements are presently available only to NACD (North American Commercial Division) dealers. The same seal, but a green color with a tab, will later be available directly from Caterpillar to all other dealers, and will be announced in this publication at that time.
The seals are now available in three colors to all NACD dealers.
Each seal, before shipment, is imprinted with an identifying code number by Stoffel Seals Corp. The colors and use of each color are as follows.
Seals MUST be ordered DIRECTLY from Stoffel Seals Corp. by all NACD Caterpillar dealers. Orders from ONLY NACD Caterpillar dealers will be accepted. TEPS dealers and customers are asked to order through their administering Caterpillar dealer.
Dealers and customers should now order the minimum quantity of seals because stocks of the former seals will be scrapped by Caterpillar. Do NOT order more than your immediate needs because this will delay shipments to other dealers.To expedite your orders, please do the following:
... The order must be on a NACD Caterpillar dealer letterhead (not TEPS) listing name, address, color and code for each entry. Each code will be checked against a master code and address list.... Each company named in the order must be identi-fied by category, i.e., Caterpillar dealer, TEPS dealer, or customer.... Specify a CFS-1, Type IV Seal for all orders. If this complete description is not listed, the wrong seal type may be supplied.... The minimum order quantity for each code number is 1,000 seals. Current cost is $58.01/thousand $10.00 surcharge, FOB supplier plant. Price is U.S. $ and subject to change without notice.... Send all orders directly to:Stoffel Seals Corporation
400 High Ave., P.O. Bx 825
Nyack, NY 10960 U.S.A.
Attn: Mr. Joseph Kelley
Telephone: 914-353-3800
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2484C, 2491, 2590, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 ...
320B, 320C, 322B L, 322B LN, 322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325B L, 325C, 325C FM, 325C L, 325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L...
324D, 325C, 325C FM, 325C L, 325D, 325D FM, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L...
322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
322C, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 3...
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C, 349E,...
324D, 325D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 385C L, 568 FM...
324D, 325D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 385C L, 568 FM...
324D, 325D L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 349E L, 349E L HVG, 349E L VG, 349F L, 385C L, 568 FM LL
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 32...
324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, ...
322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336...
1234724
SEAL-O-RING
793F, 797F, C175-16, C175-20
793F, 797F, C175-16, C175-20
2287107
SEAL-O-RING
C175-16
C175-16
120K, 120K 2, 120M 2, 12K, 12M 2, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M 2, 24H, 2570C, 2670C, 2864C, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325D, 325D FM, 325D FM LL...
2599151
SEAL
C175-16, C175-20
C175-16, C175-20
2599141
SEAL
C175-16
C175-16
2599140
SEAL
C175-16
C175-16
5P5952
SEAL
303, 303E CR, 324D L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 517, 527, 795F AC, 814F II, 815F II, 816F II, 836K, 854K, 924F, 926, 936, 936F, 9...
303, 303E CR, 324D L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 517, 527, 795F AC, 814F II, 815F II, 816F II, 836K, 854K, 924F, 926, 936, 936F, 9...
6V3824
SEAL-LIP TYPE
973, 973C, C175-16
973, 973C, C175-16
235D, 245B, 245D, 24M, 578, 583R, 587R, 621F, 621G, 621H, 623E, 623F, 623G, 623H, 627F, 627G, 627H, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 657B, 657E, 657G, 793F, 824C, 824G, 824G II, 824H, 825G...
4477206
SEAL-O-RING
320D, 320D GC, 320D L, 323D L, 323D LN, 323D2 L, 336D2, 336D2 L, 340D2 L, 345D L, 349D L, 3516B, 3516C, 621H, 627H, 725C, 735B, 740B, 770G, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 78...
320D, 320D GC, 320D L, 323D L, 323D LN, 323D2 L, 336D2, 336D2 L, 340D2 L, 345D L, 349D L, 3516B, 3516C, 621H, 627H, 725C, 735B, 740B, 770G, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 78...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 320D, 320D GC, 320D L, 323D L, 323D LN, 323D2 L, 330C, 330C L, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 3...
615C, C175-16, C175-20