2276077 SEAL-DUST Caterpillar parts
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
Rating:
Alternative (cross code) number:
CA2276077
227-6077
2276077
CA2276077
227-6077
2276077
Weight: 0.93 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2276077:
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
B 183-4797 Roller Lifting Fork As 1
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Refer to Operation and Maintenance Manual , " Track Adjustment - Adjust " for the correct track release procedure and adjustment procedure.
Illustration 1 g02409072
Use suitable cribbing and Tooling (A) in order to lift the track from track carrier roller (1).
UseTooling (B) to support track carrier roller (1). The weight of track carrier roller (1) is approximately 50 kg (110 lb). Remove bolt (2) and track carrier roller (1). Installation Procedure
Install track carrier roller (1) in the reverse order of removal.
Illustration 2 g02409077Note: Make sure that the shaft of track carrier roller (1) and the bore in the mounting bracket on the undercarriage frame assembly are clean and free of dirt.
Adjust track carrier roller (1) to Dimension (Z). Dimension (Z) is 7.00 mm (0.276 inch).
Tighten bolt (2) to a torque of 1000 125 N m (740 90 lb ft).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
B 183-4797 Roller Lifting Fork As 1
Personal injury or death can result from grease and oil coming out of the relief valve.Grease and oil are under high pressure coming out of the relief valve and can penetrate the body.Do not watch the relief valve to see if grease is escaping. Watch the track or track adjustment cylinder to see if the track is being loosened. Make sure the vent holes are clean before the tension is released on the track.
Refer to Operation and Maintenance Manual , " Track Adjustment - Adjust " for the correct track release procedure and adjustment procedure.
Illustration 1 g02409072
Use suitable cribbing and Tooling (A) in order to lift the track from track carrier roller (1).
UseTooling (B) to support track carrier roller (1). The weight of track carrier roller (1) is approximately 50 kg (110 lb). Remove bolt (2) and track carrier roller (1). Installation Procedure
Install track carrier roller (1) in the reverse order of removal.
Illustration 2 g02409077Note: Make sure that the shaft of track carrier roller (1) and the bore in the mounting bracket on the undercarriage frame assembly are clean and free of dirt.
Adjust track carrier roller (1) to Dimension (Z). Dimension (Z) is 7.00 mm (0.276 inch).
Tighten bolt (2) to a torque of 1000 125 N m (740 90 lb ft).
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 345C, 345C L, 345C MH, 385C L, W345C MH
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 390D, 390D L
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
385B, CR20
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
385B, 385C, 385C L, 390D, 390D L
365C, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
1968088
SEAL
365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
2059743
SEAL
385B, 5090B
385B, 5090B
330D, 330D FM, 330D L, 330D LN, 330D MH, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, M330D,...
1565080
SEAL
322B L, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 5110B, M325B, W330B, W345B II
322B L, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 5110B, M325B, W330B, W345B II
9X7701
SEAL-LIP TYPE
5110B
5110B
5110B
1968137
SEAL
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
1968136
SEAL
385B, 5090B
385B, 5090B
1715811
SEAL GP-DUO-CONE
345B II, 345C, 345C L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B