SEAL-ROD 2333972 - Caterpillar

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00590176
Install seal (19) in flange assembly (4) .
Illustration 2 g00590174
Note: Assemble the opening in snap ring (18) over the drain hole.
Use Tooling (A) to install snap ring (18) in flange assembly (4) .
Illustration 3 g00590173
Install seal (17) in flange assembly (4) .
Illustration 4 g00590171
Install O-ring seal (16) in flange assembly (4) .
Illustration 5 g00590168
Install gear plate (14) on flange assembly (4) .
Illustration 6 g00590164
Install seal (13) on flange assembly (4) .
Illustration 7 g00590162
Install O-ring seals (12) on pressure plate (11) .
Illustration 8 g00590161
Install pressure plate (11) in flange assembly (4) .
Illustration 9 g00590160
Install drive gear (9) and idler gear (10) in flange assembly (4) .
Illustration 10 g00590158
Install seal (8) on cover assembly (3) .
Illustration 11 g00590157
Install O-ring seals (7) on pressure plate (6) .
Illustration 12 g00590156
Install O-ring seal (5) and pressure plate (6) in cover assembly (3) .
Illustration 13 g00590152
Illustration 14 g00590153
Position cover assembly (3) and flange assembly (4) together as a unit. Install bolts (2) and the washers.
Illustration 15 g00590151
Install O-ring seal (1) on the lubrication pump.End By: Install the lubrication pump. Refer to Disassembly and Assembly, "Differential Lube Pump - Install" for the machine that is being serviced.