SEAL-PISTON 2334262 - Caterpillar

Illustration 8 g00628064
Remove plug (13) and O-ring seal (12) from clutch housing (9), if necessary.
Illustration 9 g00628130
Use Tooling (C) to remove retaining ring (14) in order to release clutch manifold (15) .
Illustration 10 g00628143
Remove clutch manifold (15) from the shaft. Remove seal rings (15A) from the clutch manifold.
Illustration 11 g00628272
Remove friction disc (16) from clutch piston (17) .
Illustration 12 g00628286
Use Tooling (D) and a press to compress the springs under clutch piston (17). Use Tooling (C) to remove retaining ring (18) in order to release the clutch piston. Slowly release the pressure on the clutch piston and remove the unit from the press.
Illustration 13 g00628315
Remove clutch piston (17) .
Illustration 14 g00628336
Remove ten springs (19) from the clutch hub.
Illustration 15 g00628383
Remove retaining ring (20) .
Illustration 16 g00628389
Remove the following parts from clutch hub (23) as a unit: shaft assembly (7), clutch hub (22), friction discs (21), the clutch plates and clutch pressure plate (24) .
Illustration 17 g00628412
Illustration 18 g00628432
Remove friction disc (21) and clutch plate (25). Remove the remaining friction discs and clutch plates from the clutch pressure plate.Note: Six clutch plates and seven friction discs are located on the clutch pressure plate.
Illustration 19 g00628453
Remove clutch pressure plate (24) from clutch hub (22). Remove the clutch hub from the shaft assembly.
Illustration 20 g00628482
Remove retaining ring (26) from the clutch hub, if necessary.
Illustration 21 g00628498
Place the clutch hub in this position and remove retaining ring (27) from the clutch hub, if necessary. Use Tooling (C) to remove the retaining ring .
Illustration 22 g00628545
Use Tooling (C) to remove retaining ring (28) from shaft assembly (7). Remove sleeve bearing (29) .