SEAL 2335474 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00559369
Illustration 2 g00559365
Install two O-ring seals (3) to sensor (1) .
Illustration 3 g00559364
Install sensor (1) to oil filter base (2) .End By: Install the transmission oil filter base. Refer to Disassembly and Assembly, "Transmission Oil Filter and Base - Install" for the machine that is being serviced.