2369992 SEAL Caterpillar parts
330C, 330C FM, 330C L, 330C MH
Rating:
Alternative (cross code) number:
CA2369992
236-9992
2369992
CA2369992
236-9992
2369992
Weight: 0.01 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2369992:
Number on catalog scheme:
9
For full view, you need register
Information:
Illustration 1 g03678811
Table 1
Specification for 420-4847 Differential and Bevel Gear Gp
Item Qty Part Specification Description
- Use the following procedure to assemble cover (1):
1. Assemble cover (1) and pin (2) without shim pack (3).
2. Tighten bolts (4) lightly to remove end play.
3. Measure maximum gap between cover and axle housing surface.
4. Select and install shim thickness to provide −0.03 mm (−0.001 inch) (preload) to 0.03 mm (0.001 inch) (end play) in pin.
5 1 356-4196 Bevel Gear Set Assembled backlash is 0.40 0.12 mm (0.016 0.005 inch).
6 4 6V-2624 Bolt Torque to 1825 175 N m (1346 129 lb ft).
7 36 6F-7035 Bolt Torque to 750 90 N m (553 66 lb ft).
Illustration 2 g03678812
View A-A
Table 2
Item Qty Part Specification Description
8 1 162-0177 Plug As Torque to 35.0 to 38.5 N m (25.8 to 28.4 lb ft).
9 24 1D-4626 Bolt Use the following procedure in order to tighten the bolt:
1. Torque to 300 30 N m (221 22 lb ft).
2. Turn an additional angle of 120 10 degrees.
10 12 153-1807 Bolt Use the following procedure in order to tighten the bolts in the location D as shown in illustration 2:
1. Torque to 300 30 N m (221 22 lb ft).
2. Turn an additional angle of 120 10 degrees.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM, 325D FM LL, 325D L, 325D MH, 328D LCR, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336...
322B, 324D, 324D L, 325B, 325C, 325D L, 326D L, 329D, 329D L, 330B, 330B L, 330C L, 330D, 330D L, 336D, 336D L, 336D2
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 345C, 345C L, 345C MH, 385C L, W345C MH
330C L, 330D, 330D L, 336D, 336D L, 345C, 345C L, 345C MH, W345C MH
330C L, 330D, 330D L, 336D, 336D L, 336D2, 345C, 345C L, 345C MH, W345C MH
324D, 325C, 325D L, 328D LCR, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 340D L, 385C L
330C, 330C FM, 330C L, 330C MH
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C MH, 345D L, 349D L, 349E, 349E ...
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
330B, 330B L, 330C L, 330D, 330D L, 336D
2369991
SEAL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
2369990
SEAL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
2154124
SEAL
330C, 330D, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
330C, 330D, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
330C, 330D, 330D L, 336D L, 336D LN, 336E, 345D, 349D L, OEMS
2040987
SEAL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
7I7562
SEAL-O-RING
330, 330 FM L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
330, 330 FM L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
330C, 330C FM, 330C L, 330C MH, 345B II, 345B II MH, W345B II
3264430
SEAL-SHAFT
330C, 330C L, 345B II, 365C, 365C L, 365C L MH, 374D L
330C, 330C L, 345B II, 365C, 365C L, 365C L MH, 374D L
2835993
SEAL-OIL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
2095866
SEAL-OIL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH
2040992
SEAL
330C, 330C FM, 330C L, 330C MH
330C, 330C FM, 330C L, 330C MH