SEAL-O-RING 2375000 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-5219 Bolt 2
B 1P-1853 Retaining Ring Pliers 1
Illustration 1 g03018439
Position plate (32). Install bolts (30).
Illustration 2 g03016539
Install coil assembly (29), the washer, and nut (31) on modulating valve (26). Tighten nut (31) to a torque of 13 1.5 N m (115.06 13.28 lb in).
Install the O-ring seal and nipple assembly (28). Tighten nipple assembly (28) to a torque of 14 4 N m (123.91 35.40 lb in).
Install O-ring seal (30).
Illustration 3 g03013576
Install modulating valve (26), the washers, and bolts (25). Connect harness assembly (27). Repeat Steps 2 through 5 for the remaining modulating valves.
Illustration 4 g03016436
Illustration 5 g03016036
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (23) on relief valve (22). Install relief valve (22) and washer (24). Use Tooling (B) to install retaining ring (20).
Install the O-ring seal and plug (21).
Illustration 6 g03016308
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install ball (16), spring (17), and retainer (18) in spool assembly (12).
Illustration 7 g03016256
Install slug (15) in spool assembly (12).
Illustration 8 g03016080
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool assembly (12), spring (13), and load piston (14).
Illustration 9 g03014276
Illustration 10 g03014296