AVSPARE.COM
parts catalog

SEAL-O-RING 2444515 - Caterpillar


2444515 SEAL-O-RING Caterpillar parts CPT372
Rating:
16
Alternative (cross code) number:
CA2444515
244-4515
2444515
Caterpillar 2444515 SEAL-O-RING

Buy SEAL-O-RING 2444515 Caterpillar genuine, new aftermarket tractor parts with delivery
PUMPER,

Compatible equipment models: 2444515:

PUMPER  CPT372   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Start By:a. remove 2nd stage conveyor assembly 1. Remove bolt (1) and washer from each cylinder.2. Remove retaining plate (2) from each cylinder.3. Remove pin (4) and swing each cylinder (3) out of the way. 4. Remove three bolts (5) and washers.5. Remove plate (6) and shims (7). Upon reassembly, add shims until the swing arm pivots freely. 6. Use a fork truck or other suitable lifting device to remove swing arm (8) out of the main frame. Move to a suitable working area. The weight of the swing arm group is over 115 kg (253 lb).7. A seal and washer (9) will fall from the frame.
typical photo8. Lower the swing arm group until the pivot pin is resting on the ground.8. Remove three bolts (10) and washers.9. Remove plate, seal, and washer (11). Raise the swing arm (8) to separate it from the pivot pin. 10. It may be necessary to use a press to remove pin (13) from swing arm (8). The weight of the pin is 24 kg (53 lb). 11. Use Tool (A) to remove bushing (12) from each side of the swing arm and the swing cylinder bearings. 12. Remove two grease seals and washers (14) from the main frame (top and bottom of bore). 13. Install Tool (B) to remove two bushings (15) from the main frame. For installation of bushing (15), place Tool (B) on the opposite end of the bore and pull in from the top to its original location. (Refer to photo C59344P1). For installation of the 2nd stage conveyor assembly pivot frame bearings, reverse the removal steps.End By:a. install 2nd stage conveyor assembly

Caterpillar parts catalog:

Caterpillar parts catalog
CPT372 Truck Mounted Pumper 1WZ00408-UP


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.