SEAL-OIL 2497984 - Caterpillar

Illustration 1 g03097737
Part of the frame and some components have been removed in the above Illustration for photographic purposes.
Disconnect harness assemblies (1), (2), and (5) at the location of the electric starting motor. Remove boot (6), the nut, and disconnect harness assembly (3) from the electric starting motor. Cut cable strap (4) .
Illustration 2 g03091558
Part of the frame and some components have been removed in the above Illustration for photographic purposes.
Disconnect harness assembly (7) from the engine. Cut cable strap (8) and move harness assembly (3) and harness assembly (7) out of the way.
Illustration 3 g03092378
Disconnect ground strap (9) beneath the electric starting motor.
Illustration 4 g03090036
Remove clip (12) and pin (13). Loosen nut (11). Remove clip (14) and remove throttle cable (10) from the engine.
Illustration 5 g03092117
Loosen the clamps and disconnect fuel line (15) and fuel line (16) from the engine.
Illustration 6 g03090257
Remove the bolt and remove clip (17) and clip (18) from the pump mounting group. Move fuel line (15) and fuel line (16) out of the way. Move throttle cable (10) out of the way.
Illustration 7 g03096816
Illustration 8 g03100157
Disconnect harness assemblies (19) and (22) from the main hydraulic pump. Remove cable straps (20). Disconnect tube assembly (21) from the main hydraulic pump.
Disconnect hose assemblies (23) and (26) from the main hydraulic pump. Disconnect harness assembly (25). Cut cable strap (24) and move harness assembly (25) out of the way.
Illustration 9 g03100718
Disconnect hose assembly (27) from the main hydraulic pump. Disconnect tube assembly (28) from the main hydraulic pump.
Illustration 10 g03101079
Loosen the clamps and disconnect hoses (29) from the engine. Loosen the clamp and disconnect hose (30) from the engine.
Make sure that you have removed all hoses, hose assemblies, tube assemblies, and harness assemblies before you perform the following steps to remove the engine.
Illustration 11 g03102478
Illustration 12 g03105611
Attach a suitable lifting device to engine (31). The weight of engine (31) is approximately 426 kg (940 lb).
Remove nut (32), the bolt, and the washers.
Remove nut (33), the bolt, and the washers.
Remove nut (34), the bolt, and the washers.
Remove engine (31) .