SEAL 2541445 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before the installation procedure, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble.
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00522793
Illustration 2 g00522795
Install stem (13) and spring (14) into body (1) .
Install O-ring seal (12) onto plug (11). Install plug (11).
Illustration 3 g00522792
Install lip seal (10) onto head (6).
Illustration 4 g00522791
Install seal (4) and seal (8) onto piston (5). Install piston (5) into air cylinder (3).
Install seal (9) onto head (6). Install head (6) into air cylinder (3).
Install snap ring (7) onto air cylinder (3).
Illustration 5 g00522768
Use two bolts (2) and the washers in order to install air cylinder (3) and the O-ring seal onto body (1). End By:
Install the diverter valve (torque converter and front brake cooling). Refer to Disassembly and Assembly, "Diverter Valve (Torque Converter and Front Brake Cooling)".