SEAL-VALVE COVER 2600113 - Caterpillar

(1) Jake Brake.(2) Locknut. Tighten locknut to a torque of ... 35 8 N m (25 6 lb ft)(3) Screw. (Adjustment for slave piston setting).(4) Nut. Tighten hold-down nuts to ... 80 15 N m (59 11 lb ft)(5) Prior to installation of Jake Brake, install studs and tighten to a torque of ... 95 15 N m (70 11 lb ft)(6) Slave piston.(7) Slave piston lash setting ... 0.64 mm (.025 in) Adjust slave piston lash with the engine stopped. The exhaust valves must be closed on the cylinder to be adjusted. See the topic, Jake Brake Adjustment, in the Testing and Adjusting section of Systems Operation, Testing And Adjusting, Form No. SENR5561.(8) Exhaust bridge assembly.(9) Actuating pin.(10) Exhaust valve seat insert.(11) Exhaust valve.(12) Bolt. Tighten to a torque of ... 55 10 N m (41 7 lb ft)(13) Spacer. Tighten to a torque of ... 95 15 N m (70 11 lb ft)(14) Bolt. Tighten to a torque of ... 95 15 N m (70 11 lb ft)(15) Head bolt stud. Tighten to a torque of ... 275 15 N m (200 11 lb ft)(16) Locknut (exhaust and intake rocker arm). Tighten to a torque of ... 25 7 N m (18 5 lb ft)(17) Intake bridge assembly.(18) Exhaust bridge assembly. Tighten plunger assembly to a torque of ... 25 7 N m (18 5 lb ft)