2697852 SEAL-O-RING Caterpillar parts
785D, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 824K, 825K, 826K, 834K, 836K, 980M, 982M, 988K, C140-16, C175-16, C175-20
Rating:
Alternative (cross code) number:
CA2697852
269-7852
2697852
CA2697852
269-7852
2697852
Weight: 0.01 pounds 0 kg.
GENERATOR SET, WHEEL LOADER,
Compatible equipment models: 2697852:
Number on catalog scheme:
2
For full view, you need register
Information:
Removal Procedure
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Remove) - Remove and Install".
Install the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Release the pressure from the air system. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Release the pressure from the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g01595875
Disconnect fitting (1). Disconnect hose assembly (2).
Remove check valve (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.Note: Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 2 g01595875
Install check valve (3).
Connect hose assembly (2). Connect fitting (1).
Charge the air pressure in the air tanks. Refer to Operation and Maintenance Manual, "Starting with an External Air Supply".
Purge the air from the hydraulic oil in the brake hydraulic system. Refer to Systems Operation/Testing And Adjusting, "Brake System Air - Purge". End By:
Remove the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Remove) - Remove and Install".
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Remove) - Remove and Install".
Install the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Release the pressure from the air system. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Release the pressure from the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Illustration 1 g01595875
Disconnect fitting (1). Disconnect hose assembly (2).
Remove check valve (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals. Replace the O-ring seals that are worn or damaged.Note: Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 2 g01595875
Install check valve (3).
Connect hose assembly (2). Connect fitting (1).
Charge the air pressure in the air tanks. Refer to Operation and Maintenance Manual, "Starting with an External Air Supply".
Purge the air from the hydraulic oil in the brake hydraulic system. Refer to Systems Operation/Testing And Adjusting, "Brake System Air - Purge". End By:
Remove the retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Remove) - Remove and Install".
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
776C, 785B, 785C, 789B, 793B, 793C, 797, 797B
776C, 785B, 785C, 789B, 793B, 793C, 797, 797B
784B, 784C, 785, 785B, 785C, 785D, D9R
784B, 784C, 785, 785B, 785C, 785D
784C, 785, 785B, 785C, 785D
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
789B, 789C, 789D
785, 785C, 789, 789B, 789C, 789D
785, 789, 789B, 789C, 789D
789, 789B, 789C, 789D
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
550, 550B, 554, 560B, 564, 570, 570B, 574, 574B, 580, 580B, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, R1600, R1600G, R1600H, W330B, W345B II, W345C MH
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
785D, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
785D, 789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
3756183
SEAL-O-RING
C175-16
C175-16
3756182
SEAL-O-RING
C175-16
C175-16
3157951
SEAL
C175-16
C175-16
621K, 623K, 623K LRC, 627K, 627K LRC, 834K, 836K, 924K, 950H, 962H, 966H, 966M, 966M XE, 972H, 972M, 972M XE, 980M, 982M, 986H, 988K, C175-16, D10T2, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D8T, D9...
115, 307, 312D, 320 L, 320B, 322, 322 FM L, 322B, 322B L, 322B LN, 323D L, 323D LN, 325, 325 L, 325 LN, 325B, 325B L, 330, 330B L, 539, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 79...
583T, 587R, 587T, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 735, 735B, 740, 740B, 773F, 775F, 777F, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 844K, 854K, 990...
2072755
SEAL-O-RING
312D2, 312D2 GC, 313D2, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20, CB-564D
312D2, 312D2 GC, 313D2, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20, CB-564D
3208, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2570C, 2670C, 2864C, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336...