2761849 SEAL-LIP TYPE Caterpillar parts
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 584, 586C, HM825, MD-250, RM-250C, RR-250B
Rating:
Alternative (cross code) number:
CA2761849
276-1849
2761849
CA2761849
276-1849
2761849
FORWARDER, WHEEL FELLER BUNCHER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Compatible equipment models: 2761849:
Information:
Start By:a. remove flywheel
Any time the crankshaft seal is removed from the wear sleeve, a new sleeve and seal must be installed as a unit. If the seal is put back on the sleeve, the seal will be damaged.
1. Remove the crankshaft rear seal from the flywheel housing with tooling (A). 2. Install tool (C) in the rear seal bore.3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the edge of the tool makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve is loose.4. Remove tool (C) and the wear sleeve by hand.Install Crankshaft Rear Seal And Wear Sleeve
The crankshaft seal and wear sleeve come as a set and must not be separated from each other at any time. Carefully read Special Instruction, Form No. SMHS8508, that is included with each seal and wear sleeve before any handling of the seal group is made.
1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows:a. Clean and prepare the crankshaft outside diameter with 6V1541 Quick Cure Primer. Apply 9S3265 Retaining Compound to the crankshaft outside diameter.b. Install locator (3) and the bolts on the rear of the crankshaft (4).c. Put wear sleeve (2) and seal (7) as a unit on locator (3) with the lip of the seal toward the front of the engine.d. Put installer (5) in position on the locator.e. Put clean engine oil on the face of nut (6), and install it on the locator. Tighten the nut until installer (5) bottoms out.f. Remove tooling (A), and check the wear sleeve and seal for the correct position after installation.End By:a. install flywheel
Any time the crankshaft seal is removed from the wear sleeve, a new sleeve and seal must be installed as a unit. If the seal is put back on the sleeve, the seal will be damaged.
1. Remove the crankshaft rear seal from the flywheel housing with tooling (A). 2. Install tool (C) in the rear seal bore.3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the edge of the tool makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve is loose.4. Remove tool (C) and the wear sleeve by hand.Install Crankshaft Rear Seal And Wear Sleeve
The crankshaft seal and wear sleeve come as a set and must not be separated from each other at any time. Carefully read Special Instruction, Form No. SMHS8508, that is included with each seal and wear sleeve before any handling of the seal group is made.
1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows:a. Clean and prepare the crankshaft outside diameter with 6V1541 Quick Cure Primer. Apply 9S3265 Retaining Compound to the crankshaft outside diameter.b. Install locator (3) and the bolts on the rear of the crankshaft (4).c. Put wear sleeve (2) and seal (7) as a unit on locator (3) with the lip of the seal toward the front of the engine.d. Put installer (5) in position on the locator.e. Put clean engine oil on the face of nut (6), and install it on the locator. Tighten the nut until installer (5) bottoms out.f. Remove tooling (A), and check the wear sleeve and seal for the correct position after installation.End By:a. install flywheel
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
1850303
SEAL-OIL
2470C, 2570C, 2670C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L,...
2470C, 2570C, 2670C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L,...
2314707
SEAL-O-RING
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2470C, 2570C, 2670C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 34...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2470C, 2570C, 2670C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 34...
6K2430
SEAL
2470C, 2570C, 2670C, 2864C, 515, 525, 525B, 528, 533, 535B, 535C, 54, 543, 545, 545C, 553C, 563C, 573C, 586C, 621, 623B, 772, 814, 814F, 814F II, 815, 815B, 815F, 815F II, 816, 816B, 816F, 816F II, 84...
2470C, 2570C, 2670C, 2864C, 515, 525, 525B, 528, 533, 535B, 535C, 54, 543, 545, 545C, 553C, 563C, 573C, 586C, 621, 623B, 772, 814, 814F, 814F II, 815, 815B, 815F, 815F II, 816, 816B, 816F, 816F II, 84...
3T6541
SEAL GROUP
2570C, 2670C, 2864C, 515, 525, 525B, 525C, 533, 535B, 535C, 543, 545, 545C, 563C, 573C, 586C, 725, 725C, 730, 730C, 950H, 950K, 962H, 962K, D250E II, D300E II, D6D, HA770, HA771, HA870, HA871, TK370, ...
2570C, 2670C, 2864C, 515, 525, 525B, 525C, 533, 535B, 535C, 543, 545, 545C, 563C, 573C, 586C, 725, 725C, 730, 730C, 950H, 950K, 962H, 962K, D250E II, D300E II, D6D, HA770, HA771, HA870, HA871, TK370, ...
9F1582
SEAL
14E, 41, RM-250C, RR-250, RR-250B, SS-250
14E, 41, RM-250C, RR-250, RR-250B, SS-250
1234003
SEAL-LIP TYPE
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 2470C, 2570C, 2670C, 2864C, 515,...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 2470C, 2570C, 2670C, 2864C, 515,...
2D2443
SEAL-O-RING
120M, 12M, 140M, 14M, 16, 160M, 16G, 16H, 16H NA, 16M, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 650B, 666, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 768B, 769, 814, 814B, 814F, 814F II, 824C,...
120M, 12M, 140M, 14M, 16, 160M, 16G, 16H, 16H NA, 16M, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 650B, 666, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 768B, 769, 814, 814B, 814F, 814F II, 824C,...
2069290
SEAL-O-RING
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 34...
0536950
SEAL
24H, AP-800C, AP-800D, BG-225B, CB-224C, CB-334D, CB-335D, CB-434B, CB-434C, CB-534B, CB-534C, CB-544, CB-545, CB-634C, CP-433C, CP-563, CS-431C, CS-433C, CS-531C, CS-531D, CS-533C, CS-533D, CS-563C, ...
24H, AP-800C, AP-800D, BG-225B, CB-224C, CB-334D, CB-335D, CB-434B, CB-434C, CB-534B, CB-534C, CB-544, CB-545, CB-634C, CP-433C, CP-563, CS-431C, CS-433C, CS-531C, CS-531D, CS-533C, CS-533D, CS-563C, ...
9G5313
SEAL GP
16G, 16H, 16H NA, RM-250C, RM-300, RM-350B, RM-500, RR-250B
16G, 16H, 16H NA, RM-250C, RM-300, RM-350B, RM-500, RR-250B
2959695
SEAL-LIP TYPE
2384C, 2484C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 34...
2384C, 2484C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 34...
1437345
SEAL
2470C, 2570C, 2670C, 2864C, 525B, 525C, 525D, 533, 535B, 535C, 535D, 543, 545, 545C, 545D, 553C, 555D, 563C, 573C, 586C, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
2470C, 2570C, 2670C, 2864C, 525B, 525C, 525D, 533, 535B, 535C, 535D, 543, 545, 545C, 545D, 553C, 555D, 563C, 573C, 586C, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
1329274
SEAL-O-RING
RM-250C, RR-250B
RM-250C, RR-250B
1329275
SEAL-O-RING
RM-250C, RR-250B
RM-250C, RR-250B
1331381
SEAL-O-RING
RM-250C, RR-250B
RM-250C, RR-250B
1329276
SEAL-O-RING
584, RM-250C, RR-250B
584, RM-250C, RR-250B
1329295
SEAL-O-RING
584, HM825, MD-250, RM-250C, RR-250B
584, HM825, MD-250, RM-250C, RR-250B
1329294
SEAL-O-RING
AP-900B, RM-250C, RR-250B
AP-900B, RM-250C, RR-250B
1530496
SEAL-GREASE
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
1530501
SEAL-O-RING
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
1530502
SEAL
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
1530497
SEAL-O-RING
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
RM-250C, RM-300, RM-350B, RM-500, RR-250B, SM-350
9G5313
SEAL GP
16G, 16H, 16H NA, RM-250C, RM-300, RM-350B, RM-500, RR-250B
16G, 16H, 16H NA, RM-250C, RM-300, RM-350B, RM-500, RR-250B
1329277
SEAL-O-RING
HM415B, HM825, MD-250, RM-250C, RR-250B
HM415B, HM825, MD-250, RM-250C, RR-250B