SEAL-LIP TYPE 2824350 - Caterpillar

Compact Wheel Loader AllEarthmoving Compactor AllMotor Grader AllOff-Highway Truck/Tractor AllPipelayer AllTrack-Type Tractor AllWheel Loader AllWheel Tractor-Scraper AllIntroduction
Table 1
Revision Summary of Changes in SEBF8163
14 Added 5 part numbers.
13 Added 9 part numbers.
12 Added 3 part numbers. © 2017 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.Information contained in this document is considered Caterpillar: Confidential Yellow.This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.For technical questions when using this document, work with your Dealer Technical Communicator (TC).To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.Canceled Part Numbers and Replaced Part Numbers
This document may include canceled part numbers and replaced part numbers. Use NPR on SIS for information about canceled part numbers and replaced part numbers. NPR will provide the current part numbers for replaced parts.Summary
Thrust faces of transmission and final drive planetary carriers can be damaged by foreign material or by the failure of a washer. This guideline covers two recommended procedures that can be used to repair damaged faces of planetary carriers for transmissions and planetary carriers for final drives. A semi-finished spacer can be used if welding alters the dimension of the spacer. After the welding process, the spacer can be machined to the correct dimension. A finished spacer may also be used to repair the thrust face. If you repair the thrust face with a finished spacer, complete precision machining and positioning before you weld the spacer in place.This guideline contains the latest standards of engineering, which will help minimize owning and operating costs. A part can be expected to reach the next Planned Component Repair if the part meets the specifications in this guideline and if the part is used in the same application.Do not operate or perform any lubrication, maintenance, or repair on this product until you have understood the operation, lubrication, maintenance, and repair information. If a part has met the specification in this guideline, the part can be expected to give normal performance until the next overhaul. The conditions apply when the part is used in the same application.If this guideline shows a part that is not reusable, do not install the part. During reconditioning, correct any conditions that might have caused the original failure.Important Safety Information
Illustration 1 g02139237Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic