SEAL-DUO CONE 2880643 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01020740
Unit injector hydraulic pump (1) is located on the left side of the engine. Remove tube assemblies (3) and (4) .
Disconnect harness assembly (2) from unit injector hydraulic pump (1) .
Illustration 2 g01023312
Support the unit injector hydraulic pump by hand and remove bolts (5) and washers. Remove unit injector hydraulic pump (1) .